The G sucks at turning

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #16  
Old 01-28-2007 | 04:54 PM
partyman66's Avatar
Registered User
iTrader: (1)
Joined: Jul 2004
Posts: 3,560
Likes: 228
From: Southeastern Mass.
I'm surprised that soo many of you think the G has a poor turning radius. I'd put it at about average in that regard compared to the other cars I've driven or owned. I've certainly never had problems pulling into parking spots with it due to turning radius, which I used to have happen whenever I drove my parents old Dodge Shadow.

It certainly doesn't compare to like a Nissan 240SX or anything though.

Do you have to dramaticly redo your front-end allignment once installing this setup in order for the front wheels to not toe way in?
 
  #17  
Old 01-28-2007 | 07:09 PM
DriftDreamzSS's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Dec 2006
Posts: 217
Likes: 0
From: Ventura
same as if you replaced with stock tie rods, alignment is ofcorse recommended but count threads just so the car doesnt drive all weird to the shop.
 
  #18  
Old 01-28-2007 | 07:44 PM
DriftDreamzSS's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Dec 2006
Posts: 217
Likes: 0
From: Ventura
Originally Posted by AzianMakaveli
hey, send pics of your car! we're in the same city!
my G

and my car thats not slow
 
  #19  
Old 01-28-2007 | 08:16 PM
fhumphrey04's Avatar
Registered User
iTrader: (3)
Joined: Jan 2007
Posts: 761
Likes: 0
Originally Posted by partyman66
I'm surprised that soo many of you think the G has a poor turning radius. I'd put it at about average in that regard compared to the other cars I've driven or owned. I've certainly never had problems pulling into parking spots with it due to turning radius, which I used to have happen whenever I drove my parents old Dodge Shadow.

It certainly doesn't compare to like a Nissan 240SX or anything though.

Do you have to dramaticly redo your front-end allignment once installing this setup in order for the front wheels to not toe way in?
I work at a dealership and have driven countless cars, and believe me, it is below average in terms of turning radius. Most cars its size can just about perfectly make a u-tern on an average residential street, but my G would need about an extra 6 feet of room to do that.
 
  #20  
Old 01-28-2007 | 11:30 PM
cungkpham's Avatar
Registered User
iTrader: (13)
Joined: Feb 2005
Posts: 2,015
Likes: 7
From: Santa Barbara, Ca
oh ive seen your car before.... off on the residentials of turnpike... it was parked on a driveway and you were standing next to it with a couple of buddies... i think
 
  #21  
Old 01-28-2007 | 11:56 PM
ttrank's Avatar
Grocery getter
iTrader: (57)
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
Premier Member
It's not bad but could be better. This might be a nice mod for some of us.
 
  #22  
Old 01-29-2007 | 02:11 AM
IvoryGT's Avatar
Registered User
iTrader: (13)
Joined: Dec 2004
Posts: 4,212
Likes: 10
so it will turn around faster with that rod? Sure looks like a mod Im looking for. A cheap alternative to replacing the steering rack, I know the falken drift car has a toyota steering rack because our stock one doesn't hack it.

btw how much is it?
 
  #23  
Old 01-29-2007 | 05:13 AM
DriftDreamzSS's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Dec 2006
Posts: 217
Likes: 0
From: Ventura
Originally Posted by IvoryGT
so it will turn around faster with that rod? Sure looks like a mod Im looking for. A cheap alternative to replacing the steering rack, I know the falken drift car has a toyota steering rack because our stock one doesn't hack it.

btw how much is it?
It will turn around in a smaller space. They are $130 I think plus shipping. You just have to change them out for your stock tie rods and cut down the steering stops.
 
  #24  
Old 01-29-2007 | 11:01 AM
IvoryGT's Avatar
Registered User
iTrader: (13)
Joined: Dec 2004
Posts: 4,212
Likes: 10
Sounds awesome. Will you provide your camber and toe information when you are done with your drift setup? I have both from control arm and rear camber toe arms, but they are just at stock settings. Kinda useless if you ask me.
 
  #25  
Old 01-29-2007 | 11:06 AM
Plat04G's Avatar
Registered User
Joined: Oct 2006
Posts: 142
Likes: 0
From: Clearwater FL
I cant believe everyone thinks the turning radius is that bad. Drive a 2G dsm.... need a full 3 lanes to make a u turn. By far the worst turning radius i've driven. G's seem to have a normal turning radius to me.
 
  #26  
Old 01-29-2007 | 11:13 AM
IvoryGT's Avatar
Registered User
iTrader: (13)
Joined: Dec 2004
Posts: 4,212
Likes: 10
it sucks for a sports car...turns like a boat...my SUV turns around faster than the G and I don't mean figuratively speaking...it really does suck some what.
 
  #27  
Old 01-29-2007 | 11:53 AM
logik05se's Avatar
Registered User
Joined: Jul 2006
Posts: 1,133
Likes: 0
yeaa??? our cars have a bad turning radius lol? Well im coming out of an 05 maxima which is seriously ridiculous if anyones ever driven a 6th gen...you litterally need 6 lanes to pull off a full u turn lol. so to me the g felt great...but thats in interesting mod lemme know how it works out id be interested.
 
  #28  
Old 01-29-2007 | 09:02 PM
DriftDreamzSS's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Dec 2006
Posts: 217
Likes: 0
From: Ventura
Originally Posted by IvoryGT
Sounds awesome. Will you provide your camber and toe information when you are done with your drift setup? I have both from control arm and rear camber toe arms, but they are just at stock settings. Kinda useless if you ask me.
Im not setting the G up for drift thats what the rx-7 is for, Im not baller enough to strip my new G and have a clunky 2-way and have a cage with side bars welded in Alignment will be close to stock numbers.
 
  #29  
Old 01-30-2007 | 01:07 AM
papiloco21's Avatar
Registered User
iTrader: (5)
Joined: Aug 2006
Posts: 944
Likes: 0
all u gotta do is a half donut everytime you make a u turn and youll be ok lol
 
  #30  
Old 01-30-2007 | 02:24 AM
logik05se's Avatar
Registered User
Joined: Jul 2006
Posts: 1,133
Likes: 0
Originally Posted by papiloco21
all u gotta do is a half donut everytime you make a u turn and youll be ok lol
maybe thats why i never realized how bad it is...thats how i usually u turn lol.

 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: The G sucks at turning



All times are GMT -4. The time now is 02:10 PM.