Registered User
i wonder if that trangle where the bar meets the bracket is hollow to allow there to be room for coilover adjusters. sucks, looks like it has be be taken off every time you want to adjust them....
Registered User
Quote:
Same here!Originally Posted by CruisnGcoupe
cant wait for the reviews
Registered User
Quote:
IF he gets a chance to install it, i'll ask him to take pics of the strut bar to plenum clearance
bobshuai?Originally Posted by aHero4Eternity
another bobIF he gets a chance to install it, i'll ask him to take pics of the strut bar to plenum clearance
FGC President
ive been callin them but everytime i call it says voicemail is full and then hangs up on me. anyone get threw on the phone yet?
FGC President
has anyone gotten this that has a crawford plenum?? does it fit?
does this bar flex like the richie bar? stand the bar on one end on the ground (vertically) and push down on it from the top and see if it flexes. richie bar has a big problem with this type of flex and it the type the ccar will put on the bar
thanks
does this bar flex like the richie bar? stand the bar on one end on the ground (vertically) and push down on it from the top and see if it flexes. richie bar has a big problem with this type of flex and it the type the ccar will put on the bar
thanks
Mine should be delivered tomorrow. However, I'm on a business trip. This bar is going on Monday at the earliest. Also I probably won't write a detailed review because there will be some up by the time I get mine on. I'll just write my impressions.
Registered User
Quote:
does this bar flex like the richie bar? stand the bar on one end on the ground (vertically) and push down on it from the top and see if it flexes. richie bar has a big problem with this type of flex and it the type the ccar will put on the bar
thanks
Originally Posted by SFLG35
has anyone gotten this that has a crawford plenum?? does it fit?does this bar flex like the richie bar? stand the bar on one end on the ground (vertically) and push down on it from the top and see if it flexes. richie bar has a big problem with this type of flex and it the type the ccar will put on the bar
thanks
i 2nd on this question and ask the same thing
Quote:
It's hardly a big problem. I have a thread in the reviews section about Richie's bar, and the topic of flex has been discussed thoroughly. The fact is flex hasn't been an issue for me. I'm sure that if I got this to fit on my sedan, I'd feel little to no difference.Originally Posted by SFLG35
richie bar has a big problem with this type of flex
Registered User
Well this Bob should have his on friday! I will take pictures too.
Registered User
Sorry guys, I just finished the installation and right now is rainning at Gardena where I work at therefore no picture. But I will try to take some pictures tomorrow during the day. But there are few things that I think you guys should know. First, the fitment is tight, I mean tight. Second, you will need to take out the AC bracket becuase you can't make it fit with that bracket there. However that my Carbon Fiber Hood can be close (this is what I was worry before after i picked the bar). I will post up details tomorrow with pictures. I will also see if I can feel the difference when I drive home tonight.
Registered User
Quote:
good size company, not big and not small but I think they just need more helpers to answer the phone.Originally Posted by SFLG35
ive been callin them but everytime i call it says voicemail is full and then hangs up on me. anyone get threw on the phone yet?
Quote:
Rich man, able to buy both. I wish I can do that. Originally Posted by filanj
I have Richies strut bar. I will be ordering the strut bar from this guy this week, so I'll post pictures when I receive it and install it with comparison photos of the two..
Quote:
I have Richie's strut bar and both of these issues are not a problem with his bar.
Originally Posted by DocJohn
I took a good look at the Circuit Sports bar and it looks nice especially considering the comparatively low price. But I don't think it would clear my APS plenum, and from a careful look at the photos of Circuit Sports bar, it appears that it eliminates the A/C line support bracket on the driver's side strut tower. I have Richie's strut bar and both of these issues are not a problem with his bar.
It eliminated the bracket but the rubber couple still able to sit under the bar and the bar is the replacment on supporting the chrome ac line.
Quote:
Originally Posted by JYear
Yeah, I noticed that too...I wonder if a slight modification can be made so that the support bracket isn't removed.
No way, I tried. Installation was easy and fast but I spent 1 hr to think if i can relocate the braket but it came out NO.
Quote:
1) The fitment looks extremely tight on this bar. So a huge concern would be its fitment over plenums (as many people on here have a plenum of some sort)
2) As with richie's bar, it doesn't look like theres much room for those with full coilover setups.
3) Will this bar fit the sedans?
4) fitment for those with blowers? or even an aftermarket intake for that matter..
Im sure there are many other concerns that I missed, but you get the point. Even with the introduction of this bar, I personally still have no regrets with richie's strut bar at all.
right now i only can answer few question.Originally Posted by Paperchasin
its funny how everyone is so quick to dive into this bar when there were numerous questions that were posed regarding richie's bar before anyone even committed. IMO, all of the questions/concerns regarding richie's bar should be addressed here before anyone can make any decent conclusions about this one. 1) The fitment looks extremely tight on this bar. So a huge concern would be its fitment over plenums (as many people on here have a plenum of some sort)
2) As with richie's bar, it doesn't look like theres much room for those with full coilover setups.
3) Will this bar fit the sedans?
4) fitment for those with blowers? or even an aftermarket intake for that matter..
Im sure there are many other concerns that I missed, but you get the point. Even with the introduction of this bar, I personally still have no regrets with richie's strut bar at all.
1) yes, the fitment is tight but the company's R&D was base on the stock set up. Personally I think (richie will like what i have to say now, I don't think it will clear with any aftermarket mod on the engine. I will take some pictures Wednesday to show the prove.)
2) no answer because i don't have coilover or richie's bar.
3) no answer because i don't have sedan.
4) It fits over my 350z Z tube so if you have anything is bigger (thicker) then Ztube's size and I will still say it will clear because it has planty room from that angle.
Quote:
wrongOriginally Posted by 2001Z71
I asked about the AC line support bracket, and they said that was a problem for the sedan, but not the coupe
Quote:
Originally Posted by aHero4Eternity
FYI: he quoted me 120 shipped and 110 picked up (by appointment only).
vendor and aHero are right, I pay cash $110 pick up. I can't wait for shipping.
Quote:
Originally Posted by aleok
i wonder if that trangle where the bar meets the bracket is hollow to allow there to be room for coilover adjusters. sucks, looks like it has be be taken off every time you want to adjust them....
It is a empty space between the 3 screw spots.
Quote:
You need me? Originally Posted by bull3t
bobshuai?
Yes, me.
Registered User
damn.. i just realized it's made in china.. how does the quality look when you got it? did you try to bend it?