Does Weld make any Prostars or Drag rims for us
#1
Does Weld make any Prostars or Drag rims for us
Really wanting to get some lightweight wheels for the track. Dont want to take the 19's to the track so looking at getting some Weld drag rims like 15x4 in the front with spacer to clear brakes and like 15x8 in the rear. If anyone knows any please post link or model number
#2
I ended up going with some enkei 16x7's. They weigh 16lbs and were only $79 from edgeracing. 16's were the smallest that would fit over the rears for my 05 sedan. I think the enkei rpf1's are like 13.2lbs, IIRC, in the 16x7, but they were $300 a piece.
I would check them out. Not Prostars, but not a bad compromise. Here's my original post if you want more info: https://g35driver.com/forums/wheels-tires/142222-new-wheels-drag-setup.html
I would check them out. Not Prostars, but not a bad compromise. Here's my original post if you want more info: https://g35driver.com/forums/wheels-tires/142222-new-wheels-drag-setup.html
#4
I'm afraid not. Sorry.
I found a thread by a guy named mrtomcat on my350z with some Prostars. He was selling them a set of MT ET Streets. The wheels were 15x8, 5.5 backspacing. The tires were 26x10.5. Here's the thread: http://www.my350z.com/forum/showthread.php?t=225985
This is technically a for sale thread, but later on he mentions that they fit on his car fine, but would not clear anybody that has factory brembos.
That being said, you might want to ask some of the resident offset experts to see if those wheels will fit on a coupe; that's beyond my expertise.
For the two years I've been on this site, I have not seen a g running Prostars. But that doesn't mean that nobody has.
I found a thread by a guy named mrtomcat on my350z with some Prostars. He was selling them a set of MT ET Streets. The wheels were 15x8, 5.5 backspacing. The tires were 26x10.5. Here's the thread: http://www.my350z.com/forum/showthread.php?t=225985
This is technically a for sale thread, but later on he mentions that they fit on his car fine, but would not clear anybody that has factory brembos.
That being said, you might want to ask some of the resident offset experts to see if those wheels will fit on a coupe; that's beyond my expertise.
For the two years I've been on this site, I have not seen a g running Prostars. But that doesn't mean that nobody has.
#5
Thread
Thread Starter
Forum
Replies
Last Post
yellowshirt
Wheels & Tires CDN
3
04-08-2018 06:09 PM
FS[Canada]: 16" Ronal Rims with 205 65R16 Michelin X-Ice
multimut
Wheels & Tires CDN
4
04-08-2018 06:07 PM
marsman328
Northern California
1
08-11-2015 07:29 PM