I have a 2003 coupe w/ sport suspension and Brembo brakes.
I was just wondering if it was possible to sport 19"s Work vs-xx's on the stock Brembo kit (coupe). I was told that it would not work.
If so, what offset is needed?
Anyone know of a so-cal shop that's reputable selling these?

 

status..f1..

it won't work..without spacers..

 

it will.

depends on what center disk is used... A or R disk should work, though you should talk to rick at status or chris at f1 for full confirmation for your car, as the amount of lip you get is a factor too...

 

status sold some wheels to some guy and told him that they would fit without spacers and they didnt. the spoke design is pretty flat. eh, whatever...3" lip FTMFW!

 

https://g35driver.com/forums/media-share-g35-coupe-v35/163737-19-works-vs-xx.html

it can work. just make sure theres enough clearance between spoke and caliper as you'll chew your calipers up with debris if theres not.

 

+1

i have the R disk +28 up front and without the 2-3mm spacer, i don't think it would've fit... the spacer DOES COME WITH THE WHEELS, so don't sweat getting some. even with this spacer, i don't think a small pebble can fit between my calipers and spokes

btw, i went to F1... chris will take care of you.

 

Get some Volk GTM's - No spacers needed.

 

ya I dont think that a piece of paper can fit inbetween my caliper and back of my rim

 

awesome, thanks for the advice all!