$25 for however can solve this problem with my car!
#1
$50 for however can solve this problem with my car!
Ok, so here is the problem I am having...above 40mph (roughly) the front end sounds like it is grinding; the dealer I bought it from said they would check it out...which they did but they blamed it on the tires (bull****)...also when you turn left it makes a horrible grinding sound along with turning the VDC OFF light and SLIP light on...now if I turn the VDC off when I first start the vehicle the SLIP light won't come on but as soon as I start driving it turns on (never happens in reverse only in drive or manual mode). Also if I don't turn the VDC off then the brakes will lock up when I start driving, in turn turning the VDC and SLIP lights on (not flashing but constantly on).
I know it's not brakes because I topped off the fluid then a week later changed my brake rotors and pads (as suggest on here). So brand new rotors and pads. My steering wheel is off from about 9pm and 3pm line up, to about 10 to 4-ish. I highly doubt that is the problem though.
The nearest I dealer is 100-ish miles away in Clarksville, TN (I live in Paducah, KY) for warranty work. I have 50,010 miles right now on it...so I assume all my warranty is fubar and gone (bought it used with 47k miles).
So yes, whoever can narrow this problem down and help me resolve the problem with get $50.
Thanks,
NkryptD
I know it's not brakes because I topped off the fluid then a week later changed my brake rotors and pads (as suggest on here). So brand new rotors and pads. My steering wheel is off from about 9pm and 3pm line up, to about 10 to 4-ish. I highly doubt that is the problem though.
The nearest I dealer is 100-ish miles away in Clarksville, TN (I live in Paducah, KY) for warranty work. I have 50,010 miles right now on it...so I assume all my warranty is fubar and gone (bought it used with 47k miles).
So yes, whoever can narrow this problem down and help me resolve the problem with get $50.
Thanks,
NkryptD
Last edited by NkryptD; 09-17-2007 at 01:53 PM.
#3
#8
#11
#14
Have yet to take the fuse out...where is the fuse panel and which fuse is the VDC and or Slip fuses? As far as disabling I usually punch the VDC button, but even then the VDC stays off and wont come back on (the light stays on but won't turn off) and then once I get going the slip light comes on.