Hey

How does a 350Z TEIN S tech spring drop a G35 more than what a G35 TEIN S tech spring does when the drop amount for a 350Z spring is .7/.6 and the amount for a G35 TEIN spring is 1.2/.9???


I just don't see the difference how 1/2 inch drop extra makes the 350Z springs drop the G35 more than the G35 springs themself.

Anyone have any ideas?

I tried to make this as clear as possible.

Thanks.

 

Every car is diffrent even though the parts are interchangable like the Z & G.
If you'll go to www.tein.com and look under springs and the G vs Z you'll be
able to see the spring rating diffrence.

 

from my understanding z springs will lower the coupe 1/2 inch more and 1 inch more on the sedan then they would on a z

 

Since the oem ride heights differ by 1/2" vs the coupe and 1" vs the 350Z, any spring made for the Z lowers the coupe and sedan that additional amount vs that springs published numbers for the Z. Same thing goes for a coilover spec is that shown for the 350Z, you add the same amounts to the min and max drop height ranges.

 

the following thread should help you out. https://g35driver.com/forums/brakes-suspension/65190-g35-350z-aftermarket-coilover-springs-shocks-spec-s-w-updates.html

 

Awesome, thanks for the help guys.

I went wtih G35 Tech S springs. Will be putting them on myself since its not hard. thanks again.