Pulled fenders
i think some people are confused between a pulled fender and rolling fenders..
this was the best example i could find..
http://forums.vwvortex.com/zerothread?id=3413323
a pulled fender is much more radical than just rolling it.
this was the best example i could find..
http://forums.vwvortex.com/zerothread?id=3413323
a pulled fender is much more radical than just rolling it.
Originally Posted by VQ Hotness
Alright im wanting to know who has pulled their fenders here on the forum? I have not found any information or pics. I would also like to know from those of you that have had this done how much you were charged.
The reason why im looking into this is b/c im looking at a used set of IForged aeros and the rear is a 10in with a est 30-33mm offset. So either i would have to run nasty neg camber or pull my fenders to make them fit right.
The reason why im looking into this is b/c im looking at a used set of IForged aeros and the rear is a 10in with a est 30-33mm offset. So either i would have to run nasty neg camber or pull my fenders to make them fit right.
in my head im thinking 33mm offset +3mm = 36mm use a 255/30 and dial in some negative camber and you'll be in set. or at least i hope so..
The Aeros would look hot... i say go for it.
Joined: Oct 2005
Posts: 1,578
Likes: 1
From: Wellington Florida
ive talked to a local wheel shop and was told you can safely machine 2-3mm off the back of the wheel to give you a higher offset.
Ive always wondered this. Ill have to call up some local shops in the area. Ive heard that alot of people end up sometimes pulling their fenders when they are attempting to roll them.
Btw did that shop ever give you a price for doing this ?
Originally Posted by GThIrtYFiZle
Crusin G coupe.... U have some pics of the rear end of the car? I wanna c how the wheels look.
Originally Posted by VQ Hotness
Ive always wondered this. Ill have to call up some local shops in the area. Ive heard that alot of people end up sometimes pulling their fenders when they are attempting to roll them.
Btw did that shop ever give you a price for doing this ?
Btw did that shop ever give you a price for doing this ?
up here in jax there is a guy called lugman. he builds custom spacers, redrills wheels, and bores the center of wheels.
he actually has a website, but doesnt list much on it. www.lugman.com
maybe give him a call to see what it costs. keep us posted on how it turns out.
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
Dec 18, 2018 05:43 PM
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
