tein monoflex too stiff!!! help!

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

May 12, 2008 | 02:35 AM

#16

Gsedan35

Registered User

iTrader: (2)

Joined: Apr 2003

Posts: 3,288

Likes: 35

Quote:

Originally Posted by streetxtreme

hi, i have the monoflex made for the nissan 350z installed on my 2004 infiniti g35.
I find that the springs are too hard for daily driving.

1. Do you have another spring that will fit on my shocks that are softer?

2.Can i just buy lowering springs made for the g35 and install them on the monoflex shocks?

3. I know the rears i can just get any spring and install them since the shock and springs are separate.
but the fronts are a shock / spring unit. so just wondering if a spring like the skunk2 will fit?

Any 2.5" inside diameter spring 8" tall will work on the front, HOWEVER you cannot go softer then 12Kg, not unless you send the damper backt to Tein for a revalve, which may or may not be cheaper then trying to resell the setup at a steep discount. The JDM Monoflex uses 10Kg/9Kg spring rates and I would think softer valving, why don't you call Tein and ask them how much for the springs from the JDM kit and how much to revalve yours?

2. NO!

3. NO!