hey all i lowered my g with 350z s techs and i did the spring mount mod. i also have 20's and i still have a 2 finger gap in the back it is like it is not droping. what do you all think is going on. from the pics that i have looked at everyone is almost tucking tire. my buddy has my cam so i cant take pics to show you right now. the front looks great but the back im gona have to cut like 4 coils off. lol

 

take it for a quick spin and see if the spring settles back. springs take
at least a few weeks to settle in completely (usually 500miles or so).

 

camber it

 

i have been driving it and it is not comming down. i had alot of camber but i put the camber kit on i would think less camber would fill up the gap more.

 

how many fingers gap did you have before the drop on the 20's? how much did you cut off when you did the springmount mod?

 

less camber and/or spacers will shrink the gap and make the rear appear to be lower

 

i think i had around a two finger gap before i cut almost 1/2 inch off the springmount. my rears are 20/10.5 with a +29 i have a spc rear camber kit. i just want the butt to sit like the front but i dont want to put tires on everyweek

 

heh...the butt.

 

does anyone have close up pics of around the same setup as i do? that would be great

 

does anyone else have anything to add

 

check the picture share as well as do a search in the marketplace for ppl selling wheels the same size as yours. chances are they will have pix showing how flush they are with the fenders.

also, with a +29 offset you should be able to get away with a 10-15mm spacer in the rear as long as you roll your fenders

 

i rolled my quarters the other day cause i was thinking when i did the spring mount mod i would tuck tire i dont know i look at everyone elses pics and it looks great but no close up pics with there finger stuck in it

 

why don't you just post a picture

 

yeah, not too many pix of guys fingering their fender gap lol

anyway, i think spacers would help you out a lot visually. my car is on zH-techs and it looks a lot lower than it is because of the rear spacers (15mm on 10.0" rims with 275 tires):

 

big c i dont get the spacer thing? if you wanted to push them out more why did you not just get 20/11?