Question for DIYers on SPC rear toe bolt install
#1
Question for DIYers on SPC rear toe bolt install
The instructions for the 72050 talk about making the bolt hole larger for the toe bolt:
Has anyone done this DIY? If so how?
I have my front and rear SPC kits on the way, just brushing up on research. I want to install them myself and then get it all aligned. I installed my Eibach pro kit already.
Thanks for any help.
instructions here: http://www.spcalignment.com/PROD_DIR...txt&cmd2=72050
8. Mark area to elongate hole with template provided and use #85126 Rotary file or equivalent to elongate slot. Check to make sure hole is the right size by placing the new bolt with a cam on the head into the hole, it should rotate 360 degrees.
I have my front and rear SPC kits on the way, just brushing up on research. I want to install them myself and then get it all aligned. I installed my Eibach pro kit already.
Thanks for any help.
instructions here: http://www.spcalignment.com/PROD_DIR...txt&cmd2=72050
Thread
Thread Starter
Forum
Replies
Last Post
kinetek
Brakes & Suspension
9
08-03-2015 04:25 PM
youngdip631
V36 Brakes, Suspension, Wheels & Tires
14
07-29-2015 11:28 AM
netcbc
Steering & Suspension CDN
0
07-24-2015 01:59 PM
bolt, bolts, diy, file, g35, g35driver, hole, install, installing, instructiin, instructions, rear, rotary, spc, toe