Registered User
Thanks for the feedback guy. I think i am heading in the direction of the Stance coils. Plus i know eventually i will want to slam it as far as it can go. just threw out a 1" number to see what people say. I have all the tools to put them on myself. I am just a little ifffy about the back setup and how to install it. Anyone have any threads explaining in detail about the back one.DOMO
Registered User
Quote:
Ride wise, by the book the BCs will ride better due to the lower spring rates (8k and 10k) but stance coils ride amazing in my opinion.
I think BCs can be had for about $900 shipped inside of the states, Stance are about $1200 shipped inside the states.
You'll need to have them installed if you're not up to it which is usually $200-$300 labor charge.
All that being said.
Stance.
Says in the first page, BCs are made in Taiwan, stance are made in Japan. Do you want the Infiniti? or the Kia?
I THINK I WILL GO WITH THE INFINITI MY GOOD SR.Originally Posted by 4DGS
I too recommend just springs, like the eibach prokit... but I'll give you my opinion on coils anyways.Ride wise, by the book the BCs will ride better due to the lower spring rates (8k and 10k) but stance coils ride amazing in my opinion.
I think BCs can be had for about $900 shipped inside of the states, Stance are about $1200 shipped inside the states.
You'll need to have them installed if you're not up to it which is usually $200-$300 labor charge.
All that being said.
Stance.
Says in the first page, BCs are made in Taiwan, stance are made in Japan. Do you want the Infiniti? or the Kia?
Blue Dream
I drove ttrank's car solo
close
Dec 14, 2024
- Join DateMar 2009
- LocationBy the sea, Tx
- Posts:18,299
-
iTrader Positive Feedback100
-
iTrader Feedback Score(50)
- My RideG35 sedan w/ too much money in mods
-
Likes:2,160
-
Liked:1,488 Times in 1,223 Posts
Quote:
the best part is that they also offer some trick rear camber arms.
all the best!
I had no clue these were even available but I like them. I would have considered these had I known about them before I bought the Stillen arms.Originally Posted by flipm3
Stance has engineered a great product.the best part is that they also offer some trick rear camber arms.
all the best!
http://intensepower.com/strecaarni35.html
Registered User
Quote:
Stance coilovers are not made in Japan... I think they might be make in Korea but I know they're not made in JapanOriginally Posted by 4DGS
Says in the first page, BCs are made in Taiwan, stance are made in Japan. Do you want the Infiniti? or the Kia?
Former G35driver Vendor
Quote:
Ask the boys at stance. Components are made in various parts of the world. They are TUV certified, which only a few shocks have, including the KW.Originally Posted by dvo
Stance coilovers are not made in Japan... I think they might be make in Korea but I know they're not made in Japan
Registered User
being made in Japan is different then being assembled in Japan. where are the dampers themselves(which I consider to be the most important part) made?
On a side note, these are the coilovers from my buddy's FC. He has Stance on them and he was pretty upset with them. They're way to close to the rear knuckles and he needed to add a washer to space it out some. IT ground the coilover down quite a bit
On a side note, these are the coilovers from my buddy's FC. He has Stance on them and he was pretty upset with them. They're way to close to the rear knuckles and he needed to add a washer to space it out some. IT ground the coilover down quite a bit
Former G35driver Vendor
Quote:
On a side note, these are the coilovers from my buddy's FC. He has Stance on them and he was pretty upset with them. They're way to close to the rear knuckles and he needed to add a washer to space it out some. IT ground the coilover down quite a bit
Ouch...ya that does not look too good. Not the worst I seen. Seen a nasty KW the other week, broken at the bottom where it mounts on an STi. Nothing is booletproof out there. He should call STANCE and get that warrantied. I am sure they will help him out. Originally Posted by dvo
being made in Japan is different then being assembled in Japan. where are the dampers themselves(which I consider to be the most important part) made?On a side note, these are the coilovers from my buddy's FC. He has Stance on them and he was pretty upset with them. They're way to close to the rear knuckles and he needed to add a washer to space it out some. IT ground the coilover down quite a bit
Did you call stance BTW? ask them regarding their parts? Origin etc....
Registered User
Man that suck about the stance coilover. I hope they help out with that!