hey, everyone
i just receive my NRG strut bar, but they didn't come with any instruction or any bolt. it only have the bar and two bracket to mount on top of the suspension.
is that how it suppose to be?
If it is not come with any instruction, than can any of u let me know what bolt i need. I can go to home depot and get those bolt, and i can use some tutorial on how to install this bar too.
i would appreciate for ur help.

i already use the search engine, but i didn't find much info on this.
thanks in advance

 

My NRG STB came with M10 1.5 75mm bolts. You'll need 2 bolts, 4 flat washers, and 2 lock washers.

 

thanks a lot
how about the bracket bolt that go on top of the suspension?
i saw three whole on each bracket i assume i will need 6 of those
thanks again

 

You should be able to reuse the stock ones.

 

The three 10mm strut nuts will be used to install the bar mounts.

 

The top strut bolts are M8 1.25, not 10mm.

 

Thanks for the correction. For some reason I was thinking 10.

 

thanks a lot

any tutorial will be great too

 

WYSIWYG

It's self-explanatory. The brackets will only go on one way.

 

coolz
thanks

 

im having trouble with mine. i installed it but i have to push my hood down a bit. its hitting the strut bar. its on the lowest setting i believe. i will play with it some more tommorow.

 

Same problem with mine. I just got it today and it wont fit.
do these fit 07 coupes? still waiting for a call back from Toni at Riverside Infiniti.

 

well my shop said it rubs hood, so i tried myself and there still seems to be a clearance issue. I mean,i can close hood but it doesnt look right. Also, the 2 outer bolts for the adjustments were bent. I need the ARC one.. this is a joke.

 

You need to widen the slots on the brackets to provide some more clearance. Just use a file and a little bit of elbow grease - takes about 3 minutes.