I need advice! G35 S techs.

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 10, 2008 | 12:03 AM
  #1  
Blackmouf's Avatar
Thread Starter
|
Registered User
iTrader: (23)
Joined: Nov 2007
Posts: 3,684
Likes: 0
From: SoCal
Arrow I need advice! G35 S techs.

My g needs a drop badly and I debating on wether to buy g35 s techs or 350z h techs. I'm running stock suspension (non-sport) and would prefer not to change my shocks. I'm leaning more towards g35 s techs due to the 3 finger gap I have between my tire and my fender. Also will the higher spring rate on the 350z's kill my shocks? I'm planning on buying a nismo front and dont want the car front to be too low. my offsets are

front: 19x9.0 5x114.3 +26
rear: 19x10.5 5x114.3 +22

will the tires rub with either of these drops? I would greatly appreciate all the help in making my desicion. Thank you!

 
Reply
Old Aug 10, 2008 | 12:10 AM
  #2  
elayman's Avatar
Registered User
iTrader: (33)
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
i would get the z htechs.. i think it has a better drop (just enough) than the g stechs that drop it a little more than my tastes. i like the quad exhaust but I think you need a pretty aggressive front/sides/hood to make it come together nicely. anyways good luck w/ the drop
 
Reply
Old Aug 10, 2008 | 12:39 AM
  #3  
Blackmouf's Avatar
Thread Starter
|
Registered User
iTrader: (23)
Joined: Nov 2007
Posts: 3,684
Likes: 0
From: SoCal
Thanks! Yea this picture is terrible to show off my quads. Ill have to get better. Anymore suggestions? What about the spring rates and shocks?
 
Reply
Old Aug 10, 2008 | 12:45 AM
  #4  
elayman's Avatar
Registered User
iTrader: (33)
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
u know i dont know anything about suspension.. i just know im planning on 350z htechs im not dropped yet eiter
 
Reply
Old Aug 10, 2008 | 03:50 AM
  #5  
Blackmouf's Avatar
Thread Starter
|
Registered User
iTrader: (23)
Joined: Nov 2007
Posts: 3,684
Likes: 0
From: SoCal
bump
 
Reply
Old Aug 10, 2008 | 01:05 PM
  #6  
Blackmouf's Avatar
Thread Starter
|
Registered User
iTrader: (23)
Joined: Nov 2007
Posts: 3,684
Likes: 0
From: SoCal
Ttt
 
Reply
Old Aug 10, 2008 | 06:57 PM
  #7  
Blackmouf's Avatar
Thread Starter
|
Registered User
iTrader: (23)
Joined: Nov 2007
Posts: 3,684
Likes: 0
From: SoCal
bump. please help
 
Reply

Trending Topics

Old Aug 11, 2008 | 05:30 AM
  #8  
Blackmouf's Avatar
Thread Starter
|
Registered User
iTrader: (23)
Joined: Nov 2007
Posts: 3,684
Likes: 0
From: SoCal
not even a mod can chime in?
 
Reply
Old Aug 11, 2008 | 09:57 AM
  #9  
jlin615's Avatar
Registered User
iTrader: (22)
Joined: Dec 2007
Posts: 2,078
Likes: 1
From: SoCal - Los Angeles [818]
Z-htech should give you slightly less than 2 finger gap between the tire and fender, G s-tech probably will site right above the tires. z-htech springrate (358/375) is only slightly higher than your current springs (314/342), I wouldn't imagine it'll kill your shocks. Both of these springs will still allow Nismo bumper, but may scape at times if you not careful. With Z-htech, you might rub a tiny bit in the back when have full tank and drive a VERY sharp curve.

With your current setup, I'd go with G stech with fender roll. PM soad, he can do a good fender rolling and reasonable price.
 
Reply
Old Aug 11, 2008 | 04:01 PM
  #10  
Blackmouf's Avatar
Thread Starter
|
Registered User
iTrader: (23)
Joined: Nov 2007
Posts: 3,684
Likes: 0
From: SoCal
So what made you choose 350z h techs over G s techs?
 
Reply
Old Aug 11, 2008 | 05:13 PM
  #11  
jlin615's Avatar
Registered User
iTrader: (22)
Joined: Dec 2007
Posts: 2,078
Likes: 1
From: SoCal - Los Angeles [818]
Originally Posted by Blackmouf2002
So what made you choose 350z h techs over G s techs?
#1 Lowering height, I only want a subtle drop.

#2 Comfort, The stock sports springs was alreadt too stiff for me. G s-tech is even softer, but height is still priority.

#3 Alignment, most people got good alignment with z h-tech, some are unlucky like me.
 
Reply
Old Aug 11, 2008 | 07:25 PM
  #12  
Blackmouf's Avatar
Thread Starter
|
Registered User
iTrader: (23)
Joined: Nov 2007
Posts: 3,684
Likes: 0
From: SoCal
Ok see all your factor are kind of like mine. I'm only really looking for an inch drop all around. I would kind of prefer stiffer springs for hitting turns and what ever saves me from buying a camber. I think I'm going to try the z htechs. Thanks for the info.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Exterior - Body Parts CDN
2
Aug 21, 2015 09:50 AM
DRG35R
Wheels & Tires
10
Jul 31, 2015 10:23 AM
VANST3R
Lights
2
Jul 27, 2015 08:20 PM
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM
CrazyLogic219
G35 Coupe V35 2003 - 07
26
Jul 23, 2015 10:58 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 11:33 AM.