Are my camber degrees correct?
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
Are my camber degrees correct?
I have a 2005 coupe and I just got my alignment done.. At the top of the page it says G35 sedan but the guy assured me it was the same
can anyone confirm if these are the right specs? Also he said it is maxed out and cannot be any more positive in the rear?
what's up with guys running positive camber and such?

here are some pics of the rear


can anyone confirm if these are the right specs? Also he said it is maxed out and cannot be any more positive in the rear? 
here are some pics of the rear


that seems about right, the rear right toe could be decreased a bit, and I would have them even out the front toe ~0.04, but without camber kits they can't do much more than that
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
i dont have a front camber kit so the front was not adjusted more than the toe.. are the adjustments bad? is it worth taking back and forcing them to do it and waste an hour of my day?
technically they got it within specs. Unless you specified exactly what you wanted, and they agreed to set it to those values(which usually costs quite a bit more than a normal alignment, and a good alignment shop) then they did their job.
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
Dec 18, 2018 05:43 PM
FS[NorEast]: New OEM G35x Compression Rods - Save!!
The Fixer
Steering & Suspension
15
Nov 1, 2015 03:26 PM



