I wouldn't expect more than +/- 1 degree of change.

 

I have SPL A arms and SPC rear arms. My alignment is at perfect stock specs...., so it is very possible. You need not only rear chamber arms but also front A arms as well if you are going with coilovers.

If you are using the stock equipment expect to at least be 2 degrees off all around

 

thanks for the helpful info guys!

 

well what the shop that i took it at did was he played around with it and was able to make the toe to spec but the camber wus just in the HIGH negative 2's, get the toe bolts, 35 bux from spc

 

on Eibach pro (moderate drop 1.5") my OEM rear was able to get get into spec... however, I suspect going lower will require aftermarket - I picked up Sportlines (2+") and ordered rear camber and toe kit just in case.

 

of COURSE ull need afermarket stuff

 

me, or the OP?... OP is dropping 1.5 in the rear - I didnt need aftermarket for 1.5 in rear.

more than that = probably

 

well im saying If u go lower then u WILl need aftermarket

 

Sweeeet, cant wait to see your ride's new stance.

 

im getting tein cs in about a week..i only plan on dropping the front 1 inch and the rear about .7-.9...do i need camber kit and toe bolts?!