Rear swindle bushing stuck
#1
Rear swindle bushing stuck
Earlier today I tried replacing my OEM struts/springs with 350z H-techs / Tokico Blue struts.
Installing the first strut was a breeze, but the second strut on the opposing rear side (left rear) the bolt that goes through the lower part of the strut to the upper spindle was ceased in the bushing. Tried to remove this bolt and the bushing seperated from the inner part of the housing. Now can I replace just the bushing?
A problem were having is that part of the bushing is stuck in the spindle, and were unable to remove it with the tools we got. Anyone have any ideas to this issue as well?
Any advice would be great, thanks.
The car is a 2004 Infiniti G35, Coupe. (Currently have the rear jacked up and ready to try anything).
Installing the first strut was a breeze, but the second strut on the opposing rear side (left rear) the bolt that goes through the lower part of the strut to the upper spindle was ceased in the bushing. Tried to remove this bolt and the bushing seperated from the inner part of the housing. Now can I replace just the bushing?
A problem were having is that part of the bushing is stuck in the spindle, and were unable to remove it with the tools we got. Anyone have any ideas to this issue as well?
Any advice would be great, thanks.
The car is a 2004 Infiniti G35, Coupe. (Currently have the rear jacked up and ready to try anything).
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM
TreeFiddy
G35 Coupe V35 2003 - 07
3
08-10-2015 06:50 PM
netcbc
Steering & Suspension CDN
0
07-24-2015 01:59 PM