not low enough...
#1
Join Date: Mar 2009
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
not low enough...
So I bought bc racing coilovers and maxxed the rear out. And barely tucking tire. Did post this up before but figured out that it was the lowest it could go. I got the typeBR coilovers. So now I searched and only thing I could find was to cut the top srping seat a lil. Probably want to do that but anybody kno where to get shorter springs? I'm going for a really low look I mean almost bagged, don't need to flam that's just how I like my cars. So any help jus lmk, thanks
#2
#4
ur going for a REALLY low look and u bought bc racing coilovers? ouch.. shuda searched around more...
anyways did you take off one of the rings or even BOTH rings in the rear? if u want shorter springs u can get them (180mm as opposed to 200mm)
and u know most people achieve that really low look with different side skirts (for example ings) and different front bumper..
anyways did you take off one of the rings or even BOTH rings in the rear? if u want shorter springs u can get them (180mm as opposed to 200mm)
and u know most people achieve that really low look with different side skirts (for example ings) and different front bumper..
#5
Registered User
iTrader: (10)
Getmelower....:)
If I intended to go that low I'd do bags like Lawrence, he's either on the ground (literally) or high enough so he can drive on the streets like a real car. You could take an inch out of the upper spring mounts, search there's a how-to here on Driver from Big C. (Chris)
Gary
Gary
#7
Trending Topics
#11
Join Date: Mar 2009
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
which coilovers should i have gotten to slam the car?? also which brand makes coilovers that the rear is one piece, is megan tracks true coilovers?? i would think one piece coilovers would slamm more than my bc coils that are separated rear sus.
Last edited by broke_kanic; 04-11-2009 at 04:11 AM.
Thread
Thread Starter
Forum
Replies
Last Post