anyone know about how much to have my oem brembo calipers would cose to get powdercoated? rough est.

 

no more then $500 i believe

 

depends. I was told i could get them done for around $200 for a set of 4. But I heard that you have to rebuild the calipers because of how it works.

 

Whoa $500? Even $200? ****.

My powdercoating guy does wheels for $200 plus sandblasting. All 4....

I would say less than $100 to $150, I don't know anything about the rebuild though.

 

In New York, $300 all 4 four any color you want. you can mial them to Prodigy Coatings> tell Joe Pedro sent you.

 

It shouldn't be too much, maybe around 100-150, but you WILL have to rebuild them so it will still be more than 150.

 

the oven the put the calipers in the complete the powder coating process is too much heat for the piston boot and certain parts in the caliper... its best to remove all components from the caliper then have them powder coated then rebuild the caliper...

 

Cost me $400 including rebuild.

 

I own a powder coating business www.rkpowdercoating.com based on what part of the country you are in the prices of powder coating will vary. Prices will also vary depending on the size of the shop you have our work done at. Since I powder coat on the side out of my garage and I have less overhead than a larger shop would, the prices that I charge are generally lower.

Just to give you a rough estimate, not to solicit your business, I could do all four calipers for $175.

Because most powders cure at 400 - 450 degrees, you will need to rebuild your calipers after they are coated.