Another Akebono kit spray painted!! pics
#17
Hahaha that jack stand has been with me since high school. It is so old it is actually retro, I once saw an old B/W movie my dad had and saw one of those hanging around someone's garage. I will probably sand it and paint it.
Thanks for all the comments guys, tomorrow I will take more pics of the fronts and the mess we have on the engine.
Thanks for all the comments guys, tomorrow I will take more pics of the fronts and the mess we have on the engine.
#22
Where are you located in PR? I am from the West (Aguada).
#23
#25
LOL .... beerrrr
PAint was duplicolor high heat engine enamel with ceramic. Color chrysler red
Process:
1-Remove the bleeder bolts and cover the inside of the hole with some paper
2-Wet Sanded the clear off the calipers (took about 10mins each caliper)
3-washed with water and dried with a microfiber cloth rest at sunlight for about 10 mins
4-Cover with tape the pistons and seals
5-Pre warmed the calipers with a blower (I live in Puerto RIco so there's a high % of humidity)
6-Applied 3 coats of paint at 10min intervals
7- 1 can of beer some pics, photobucket, G35driver ... you know the rest
Process:
1-Remove the bleeder bolts and cover the inside of the hole with some paper
2-Wet Sanded the clear off the calipers (took about 10mins each caliper)
3-washed with water and dried with a microfiber cloth rest at sunlight for about 10 mins
4-Cover with tape the pistons and seals
5-Pre warmed the calipers with a blower (I live in Puerto RIco so there's a high % of humidity)
6-Applied 3 coats of paint at 10min intervals
7- 1 can of beer some pics, photobucket, G35driver ... you know the rest
#27
Here are some more pics