Rear Camber Kit Didn't Work.. HELLLPPPP
where do you see toe bolt cuz i cant see it?? its hidding behind the muffler. the toe bolt is behind the muffler and we can not see it on the photo. Toe bolt attaches to the crossmember and the lower control arm (the lower control arm is where the spring sits in).
eh...isn't that what I just said???
Last edited by Deezflip; Mar 9, 2010 at 04:45 PM.
adjustable link is another part i have to go out and buy?
The bucket is right dead center of your pics. Just turn to the right of those pics you took, there should be another bolt that looks just like the one with your red camber arms.
...that's the traction arm and camber arm. You don't need the traction adjustment unless you have a severe drop and need additional adjustments
Your only option is to get the toe bolt, unless you want to go true coilovers on the rear and then replace the midlink with an adjustable one (cusco or SPL makes them).
You should really check if you have the toe bolt installed correctly it should help a lot. I have the same kit as you and I am dropped 1.5" with plenty of room more for toe adjustment.
You should really check if you have the toe bolt installed correctly it should help a lot. I have the same kit as you and I am dropped 1.5" with plenty of room more for toe adjustment.
i have it and bran new i can sell it to you for 120 shipped, it retails over 160 unless you can find it for cheaper. hows your other tire? who did your alignment?? seems like you have camber arm installed.
that link does the same thing it fixes your toe if you need extra adjustmens done, it brings your toe inside. look at the photos the guy says he has the camber link installed as you can see it on the photos and if the toe bolt is there what ales do you do?



