Daily Driven lowering spring question?
#31
Well I got the aftermarket stock replacement kyb's. Well here's another deal I keep getting mix people saying you have to have a camber kit and some say u don't! So we wanted to test the pro kit and the 350z h-tech an see who can get in spec or who gets the closest! Well maybe this week we are going to go get an alignment! We are trying to let the springs settle before we get an alignment so this wee they be on a week wit a few 100 miles on them! This week or next we will do the alignment and see what true and not!
#33
Heres before and after pics of my boys G we just lowered! Second page will have the lowered pics on it of the pro kit!
https://g35driver.com/forums/new-mem...ubaru-sti.html
https://g35driver.com/forums/new-mem...ubaru-sti.html
#34
Ok go my alignment done today. Ok so lets go over this again I have 350z H-Tech's 20" wheels with a 35F and 30R series tires. I have a hafe finger gap front and a finger or so gap rear. Thats about 1/4 gap front and 1/2+3/4 gap rear. I am a little off on my camber but im in spec on everything else. The camber is real close to spec so im happy with it. I hope this helps people with there setup. People on this board can be so unhelpful when you need it. I was told i would have to to get a camber kit. Yes its true but i am so close to spec in rear it would be a waist uless i wanted more + camber. The front is only a hafe a deg from min spec but i could get the SPC shim kit and be in spec. I rather have the - camber to handle better.
Last edited by extremepowderco; 04-01-2010 at 03:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
07-24-2015 11:25 AM