Looking for some help from some experts. Heres the set-up.

G-Coupe
Tein H Springs
Volk GTF
Front: 19" x 9.5" +17 offset on 245's
Rear: 19" x10.5" +24 offset on 275's

AP Racing
Front: 6 piston
Rear: 4 piston

Will this clear, or is a spacer necessary? Thanks in advance for all of your help.

 

I have the same wheels with the same specs, they clear the brembos all day so I should expect pretty much the same.

 

i've been told that the AP Brakes are "thicker"... thats my concern

 

Thats the gap I have on the front wheels.
Rear its about 2 finger gap from caliper to the face.

 

hmmm.... let me see if i can find some specs on that and compare to the specs i can find on the AP Racing

 

The person i bought my GT-Fs (same specs) had to run 7mm spacer in the rear to clear his AP racing BBK

 

Was extended studs needed?

 

Im not sure but I know that the rears wont clear

 

okay, looks like i'll experiment with some different spacer sizes. Maybe start off with 3mm get me a 5mm and 7mm and take it from there. This is starting to turn into quite the project