SPC rear camber arm install
SPC rear camber arm install
Any good DIY write up for the arms/toe bolt install? How much do you torque those bolts when re-installing with new arms and bolt? Any help is appreciated. Thanks.
Removal and install is simple.
They go in the same way they come out.
Torgue values are 65lbs-80lbs
When you remove a oem arm, take the time to make the SPL arm the same exact length. Let your alignment shop fool with making real camber changes.
On the inner most bolt and washer, make sure the washer is returned to the same exact point as when you first broke it loose. A couple of sharpe pen marks before you start works pretty good, just match the marks up on reinstall.
They go in the same way they come out.
Torgue values are 65lbs-80lbs
When you remove a oem arm, take the time to make the SPL arm the same exact length. Let your alignment shop fool with making real camber changes.
On the inner most bolt and washer, make sure the washer is returned to the same exact point as when you first broke it loose. A couple of sharpe pen marks before you start works pretty good, just match the marks up on reinstall.
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 01:59 PM
