For my new springs to settle, before I do the rear spring mount mod?

 

give it a week or so if you drive the car often...it doesnt take much longer than that.

and good luck with the spring mount mod, those things are a bitch to cut, certainly with a dull-ish hack saw blade.

 

w/ my coilovers it took about 3 weeks to settle and i drive about 200 miles a week.

 

couple of weeks and you should be pretty good

 

i'd drive at least 500 miles. somewhere between 500-1k is good enough.

 

Ok sweet, thanks guys!

 

FYI, to make the spring mount mod cutting easier keep the hacksaw blade lubed with wd-40.
Once it starts drying out you'll def feel the tension/resistance in the blade.
Having access to a table vice makes a huge dif too.

 

I have a table vise on the work bench at home, I also have a sawzall I will prolly use. I figure with both of those + lube, it should be pretty quick work.