camber kit??? on eibach pro kit and 20" wheel
camber kit??? on eibach pro kit and 20" wheel
do I have to install a camber kit on my g35 coupe 2005 if I install a eibach pro kit coil spring (1'') on a 20" wheels
thx and sorry for my english
thx and sorry for my english
That depends. Do you mind a little bit of negative camber or do you want your wheels in spec?
It's not camber that you should be worried about, but mainly the toe. With a 1" drop you don't need anything except for an alignment. But wait a little bit after installing the springs to do the alignment since they will settle. I would wait about 500-1,000 miles and then get the alignment done.
It's not camber that you should be worried about, but mainly the toe. With a 1" drop you don't need anything except for an alignment. But wait a little bit after installing the springs to do the alignment since they will settle. I would wait about 500-1,000 miles and then get the alignment done.
the wheel spec is :
front: 20" X 8.5, lip 2 1/4' 5 x 114.3 (MRR Design GT1)
back: 20" X 10.0, lip 4' 5 x 114.3 (MRR Design GT1)
I tell the question because I don't need to scrap my tires in 1 summer (+/- 1 000 miles) and I don't need problem with my car... I just like the look when the car is dropping
same car, color and wheel... but mine is not dropping

front: 20" X 8.5, lip 2 1/4' 5 x 114.3 (MRR Design GT1)
back: 20" X 10.0, lip 4' 5 x 114.3 (MRR Design GT1)
I tell the question because I don't need to scrap my tires in 1 summer (+/- 1 000 miles) and I don't need problem with my car... I just like the look when the car is dropping
same car, color and wheel... but mine is not dropping

Last edited by bolacbolac; Jul 15, 2010 at 04:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post




