camber kit??? on eibach pro kit and 20" wheel

Old Jul 15, 2010 | 03:29 PM
  #1  
bolacbolac's Avatar
Thread Starter
|
Registered User
Joined: Apr 2010
Posts: 7
Likes: 0
camber kit??? on eibach pro kit and 20" wheel

do I have to install a camber kit on my g35 coupe 2005 if I install a eibach pro kit coil spring (1'') on a 20" wheels

thx and sorry for my english
 
Reply
Old Jul 15, 2010 | 03:45 PM
  #2  
The Stimulation's Avatar
Registered User
iTrader: (69)
Joined: Aug 2007
Posts: 10,850
Likes: 158
From: Los Angeles
That depends. Do you mind a little bit of negative camber or do you want your wheels in spec?

It's not camber that you should be worried about, but mainly the toe. With a 1" drop you don't need anything except for an alignment. But wait a little bit after installing the springs to do the alignment since they will settle. I would wait about 500-1,000 miles and then get the alignment done.
 
Reply
Old Jul 15, 2010 | 04:16 PM
  #3  
bolacbolac's Avatar
Thread Starter
|
Registered User
Joined: Apr 2010
Posts: 7
Likes: 0
the wheel spec is :

front: 20" X 8.5, lip 2 1/4' 5 x 114.3 (MRR Design GT1)

back: 20" X 10.0, lip 4' 5 x 114.3 (MRR Design GT1)

I tell the question because I don't need to scrap my tires in 1 summer (+/- 1 000 miles) and I don't need problem with my car... I just like the look when the car is dropping

same car, color and wheel... but mine is not dropping



 

Last edited by bolacbolac; Jul 15, 2010 at 04:21 PM.
Reply
Old Jul 15, 2010 | 04:19 PM
  #4  
The Stimulation's Avatar
Registered User
iTrader: (69)
Joined: Aug 2007
Posts: 10,850
Likes: 158
From: Los Angeles
I meant back into factory alignment specs, not wheels specs.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wuppiedog
G35 Cars
1
Aug 7, 2015 11:16 AM
IEMaestro
20 Inch
0
Jul 30, 2015 04:30 PM
Soumilg
G35 Coupe V35 2003 - 07
0
Jul 23, 2015 09:26 AM
Soumilg
G35 Coupe V35 2003 - 07
4
Jul 18, 2015 12:33 PM
nascarbuff17
G35 Coupe V35 2003 - 07
5
Jul 16, 2015 10:23 AM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:21 PM.