I installed a set of spc front arms only without shim kit and from comparison to what it was before, it doesnt look like it gave much more positive camber over oem. Thats after having the camber bolt pushed and tighten all the way out as far as it will go within the slot towards the fender on both sides.

 

Heres another question. If u dont use the shim kit will u have problems with the VDC ABS???

 

why would you not add the shims? they give you 2 degrees positive camber

 

I saw on a few forum post that some guys didnt use the shims. Im not that low and my alignment was able to be brought back to spec.

 

Some is better than none... a lot of other camber kits offer positive camber and deliver none..if you need more that is what the shims are for...

I made a rhyme spc should pay me>>> look another rhyme im on a role

 

yea im gonna take my G in for another alignment to see how much negative camber is still there....hopefully i can be near only -0.5 now from -1.8 with just arms installed. If not i guess i will have to buy set of spc shims then.

 

I have a set of Spc shims if u need them.. pm me if u do..

 

pm'd

 

Put the shims in! You'll have more adjustment when using the negative camber of the arms.