H-Tech spring question

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jun 25, 2011 | 01:34 AM
  #1  
EuroG's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 34
Likes: 0
From: Houston,TX
H-Tech spring question

ok so i notice alot of people have on the Z h-techs instead if the G h-tech....
Im about to buy some H techs but is the drop more on the Z ones then the G, or are they the same hieght when settled .....im just looking for a simple nice drop for it being a daily driver
 
Reply
Old Jun 25, 2011 | 01:58 AM
  #2  
jookyshank's Avatar
I haz hugz to givez
iTrader: (13)
Joined: Apr 2009
Posts: 6,488
Likes: 286
From: Denver, Co
Premier Member

Lots of info on this but here's the skinny:

Z htech will be a bit lower (not much) BUT they have a higher spring rate, so your ride quality will not be compromised as much.

(G htechs are softer than stock!)


These are Z H-techs
 
Reply
Old Jun 26, 2011 | 08:12 PM
  #3  
EuroG's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 34
Likes: 0
From: Houston,TX
Originally Posted by jookyshank
Lots of info on this but here's the skinny:

Z htech will be a bit lower (not much) BUT they have a higher spring rate, so your ride quality will not be compromised as much.

(G htechs are softer than stock!)


These are Z H-techs


Z h-techs looks good but im worried i might scrape where i live ...is there a slightly bit higher spring that will still give me the quality ride , if not, z-h tech it is....
 
Reply
Old Jun 27, 2011 | 01:03 AM
  #4  
jookyshank's Avatar
I haz hugz to givez
iTrader: (13)
Joined: Apr 2009
Posts: 6,488
Likes: 286
From: Denver, Co
Premier Member

non-existant

The H-techs are about the mildest drop you can get anything less and it's basically pointless IMO Heck after less than a year with the Htechs...I'm finally thinking...I need to go lower...and you shouldn't scrape with Htechs unless you try
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
joel extreme
SOCAL Meetings & Events
0
Aug 7, 2015 03:09 AM
G35Sask
Intake & Exhaust
16
Aug 5, 2015 10:17 PM
Popes
Wheels & Tires
3
Jul 29, 2015 05:07 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 11:52 AM.