Got stuck doing a brembo conversion and need your help please
#1
Joined: Jun 2011
Posts: 545
Likes: 47
From: Atlanta, GA
Got stuck doing a brembo conversion and need your help please
Hey all, I have an 06 g coupe, and I just bought a set of brembo calipers/rotors/pads from a guy who had them on a 350z. The brembo calipers bolted up the the front with no problems, and bolted to the rears fine except I had to trim the dust shields.
The problem is, when re attempting to use my stock brake lines, the bolt and attaches the hose to the caliper is too long which is where I'm currently stuck. So my question is tomorrow morning when I go to Infiniti/Nissan, do I simply need new bolts for brembo brakes, or do I need new lines and bolts?
The problem is, when re attempting to use my stock brake lines, the bolt and attaches the hose to the caliper is too long which is where I'm currently stuck. So my question is tomorrow morning when I go to Infiniti/Nissan, do I simply need new bolts for brembo brakes, or do I need new lines and bolts?
#3
I know this doesn't answer your question, but just wanted to let you know that you should definitely change/upgrade your brake lines. When I changed my OEM brakes to the brembo, I also replaced the brake lines with stainles steel line. I would defintely recommend replacing the OEM brake lines with some braided steel lines. Good luck.
#4
Joined: Jun 2011
Posts: 545
Likes: 47
From: Atlanta, GA
I know this doesn't answer your question, but just wanted to let you know that you should definitely change/upgrade your brake lines. When I changed my OEM brakes to the brembo, I also replaced the brake lines with stainles steel line. I would defintely recommend replacing the OEM brake lines with some braided steel lines. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
tadmcmichael
Brakes
1
10-18-2015 01:47 PM