Are the suspension designs and springs perches/shock connections the same between these models?

Reason I am asking, is that I have a 2005 sedan. Certain manufcturers claim to have suspension kits for the Z or for the coupe, but don't list the sedan.

I know the sedan is the least likely to get aftermarket support... but just waat to know if I see a set of coilovers for a "350z" or "g35 coupe" it will work on a sedan. I would assume the coupe would at least be the same... obviously the 350z may have different spring rates due to weight and f/r weight distrubtion.

We're always getting screwed...

 

Yes.

Add 1" to advertised drop for 350z or .5" to G35c.

 

Bascially, if a kit says "1 inch drop for 350z" then that same kit will do a 2" drop on the sedan compared to stock springs, right? In other words, the sedan rides 1/2 inch higher than the coupe from the factory, and 1" higher than the Z from the factory.

But coilovers and such should "plug and play" just fine, eh?

Specifically, oh.... say.... the new Tanabe Seven Pros....

 

G25?

 

Edited.