hey guys~~~
i got tein cs coilovers and gt-spec brace bars today~~~
already set up the time install those stuff on saturday with MRC in NJ
I will share the process and result... can't wait~~~ and so excited~~~~

sorry for the quality of pics below... i took them with my cell phone...

nice! cant go wrong with Tein's!

oh~, yes you can...

Please elaborate!

hehe... for one (or two):

s-tech rear springs for g
h-tech rear sprnigs for g

u guys know about MRC motorsports?
as i know, MRC is the only 350z/G35 specialist in NJ, PA area... is this right?

I've heard nothing but good things about them. They do frequent the board as well. Depending where you are located, Car V2 in Wilmington might be closer. They do a lot of 350Z / G35 work as well. I've done business with Car V2 and have only positive things to say about my experience so far.

I'd recommend talking to both shops, they both will have their pro's and con's and the key is to find who shares the same goals and modding methodology you do.

Thank you for joining my club on that one. Or did I join yours? Either way, listen to the man!

what are so bad about the s-techs

wilmington sounds good to me... i live in philly as well...
as u recommed, i will try MRC this time and maybe... i will work with car v2 for my wheels, exhaust and manifold... and etc...

anyway thank you for your local shop info...

and i will let you guys know how TEIN CS and Brace bars work, also the experience at MRC...

Tein's springs for the G's are a downgrade from stock. Sure they give a nice lowered look, but they are softer that stock. Tein's G35 springs are more of an "all show, no go" deal. Looks nice, but performs are decreased from the factory.

Aw man, you got me all excited when you said "brace bars"!!! You just got their lower tie bars. When you said "brace", I thought you meant the chasis brace that they made for the 350Z's, and that they FINALLY made one for the G35s! If they made that, I would buy it in a heart beat!!!!!!!

keep us updated on how they turn out after install....can you take some pics of ur g on the lift when they put on the GT-Spec braces? thanks

as tein.com shows us, spring rate of CS F/R is 7kg/mm=392 compate to our stock spring rate is Front:314 Rear:427

we can't judge that the softness of tein cs with the number we know BUT tein CS still stiffer than stock slightly... anyway we will see... how they work!!!

We installed the items and it looked HAWT!!!We also testfittedthe GT-Spec subframe connector and it fit perfect!!