Offsets for Work VS-XX 19"
#1
Offsets for Work VS-XX 19"
03 with Brembos
I wanted to go 9.5f and 10.5r, but I want a more aggressive rear
I know +28 for the front, and rear, but like I said I want a wider lip for the rear.
suggestions please
edit: here is the WORK chart
http://www.worksuperwheels.com/wheel...cation_19.html
i just need to know how wide I can go safely
I wanted to go 9.5f and 10.5r, but I want a more aggressive rear
I know +28 for the front, and rear, but like I said I want a wider lip for the rear.
suggestions please
edit: here is the WORK chart
http://www.worksuperwheels.com/wheel...cation_19.html
i just need to know how wide I can go safely
#2
+28 may not fit you, I just ordered same setup from F1 and I have a 05 6MT Coupe and the lowest offset that will clear my calipers (05 Calipers bigger than pre 05) is +32F and +29R. With that Offset i will be getting 3 inch Front and 4 inch Rear Lip. But you have the Brembo.
Call him he seem to know his stuff, plus he said with the same setup if I'm going with a SF Winnings, i'll need +19 so basically he said it's the design of the wheel that dictates the offset you'll need.
Edit: Plus I had another vendor email Japan Work to confirm it, and Japan Work said +29F will clear my caliper by .7mm and Work said it should be 1 - 3mm and +28 Rear will not fit and will be short of 2.7mm to clear the caliper. And this is a non-Brembo spec.
Also Chris from F1 that with a Brembo and VSXX you'll need a spacer no matter what offset. but someone from here said that we dont so go figure.
Call him he seem to know his stuff, plus he said with the same setup if I'm going with a SF Winnings, i'll need +19 so basically he said it's the design of the wheel that dictates the offset you'll need.
Edit: Plus I had another vendor email Japan Work to confirm it, and Japan Work said +29F will clear my caliper by .7mm and Work said it should be 1 - 3mm and +28 Rear will not fit and will be short of 2.7mm to clear the caliper. And this is a non-Brembo spec.
Also Chris from F1 that with a Brembo and VSXX you'll need a spacer no matter what offset. but someone from here said that we dont so go figure.
Last edited by FI'ed G; 03-17-2006 at 01:46 PM.
#3
#5
thus brings about the reason i started this thread lol
there is so much mixed information concerning this stuff
i mean, i just read a post where a guy said he was getting the work vs-xx with a +17 in the rear and +19 in the front.
someone told THAT individual that they would clear the brembos
there is so much mixed information concerning this stuff
i mean, i just read a post where a guy said he was getting the work vs-xx with a +17 in the rear and +19 in the front.
someone told THAT individual that they would clear the brembos
#6
I believe we can get that but Chris said that I'm going to need to roll my fenders if I go below +32F and +29R. Also with this i'll be getting 3" Front and 4" Rear Lip which is big already.
Edit. He also said that a +29 on a VSXX has a bigger lip than a +19 SF winnings. so It's the design of the wheel that dictate the lip too... I'm just saying what he said to me.
Edit. He also said that a +29 on a VSXX has a bigger lip than a +19 SF winnings. so It's the design of the wheel that dictate the lip too... I'm just saying what he said to me.
Last edited by FI'ed G; 03-17-2006 at 01:53 PM.
#7
Trending Topics
#8
you need a 5mm spacer to clear work vs-xx. id go with +17 rear and +19 front ..thats the offset im on right now and its very aggressive but it looks sweet its really flush with the fenders ..dont know if thats what your going for.check my pic to get an idea of what the offset looks like:
Last edited by jimmytango00; 03-17-2006 at 02:09 PM.
#11
#12
Originally Posted by jimmytango00
you need a 5mm spacer to clear work vs-xx. id go with +17 rear and +19 front ..thats the offset im on right now and its very aggressive but it looks sweet its really flush with the fenders ..dont know if thats what your going for.check my pic to get an idea of what the offset looks like:
But that's not a VSXX Like Chris said, we can slap a +19 on the SF winnings with out rolling the fenders but on VSXX +29 will be the equivalent
#13
#14
#15