Headlight painting party? lol
#137
There's only one guy in Cali that has done it successfully.
The problem is they use a different sealant.
The sealant is very close to the melting point of the plastic.
There have been a few that ended up with a pile of plastic goo, after attempting it.
The only other way is to get a couple of donor lights and do the chop method.
The problem is they use a different sealant.
The sealant is very close to the melting point of the plastic.
There have been a few that ended up with a pile of plastic goo, after attempting it.
The only other way is to get a couple of donor lights and do the chop method.
#138
#139
#140
#141
#142
Ahh sorry Aju!
Make sure you keep some wax on there to stop the the oxidation this summer.
Aman and I are going to attempt carbon bezels with 3m DI noc vinyl, not sure how it will turn out but we'll see!
Edit;
Ian, I'll look into it. The QX56 lights are similar to what you've explained and they were a nightmare!
Make sure you keep some wax on there to stop the the oxidation this summer.
Aman and I are going to attempt carbon bezels with 3m DI noc vinyl, not sure how it will turn out but we'll see!
Edit;
Ian, I'll look into it. The QX56 lights are similar to what you've explained and they were a nightmare!
#144
#147
Thread
Thread Starter
Forum
Replies
Last Post
Nickles
Care & Detailing
5
09-01-2015 08:11 PM