Ask a Professional Detailer...
#706
george, i'll be detailing my car soon... i have mezerna's IP and FIPP, but now ordered the power gloss compound to hopefully have more paint correction (IP on yellow wasnt strong enough so i need to step it up)... so my question is: does it matter which sealant i apply??? i considered getting zaino z-cs clear seal but i'd want to confirm that i will not have any issues bonding if i used mezerna's products to do the paint correction... also, could i top zaino z-cs with natty's blue (i have one that i havent used, so i thought perhaps i could use after allowing enough time for the sealant to cure)??? thanks in advance...
#707
Originally Posted by Detailed Image
I'd first start out investing in a quality wash kit so that you don't have to worry about adding more imperfections to the paint. A good starting point would be our Washing & Drying Starter Package. This will give you everything you need (except 2 buckets) to perform a quality wash. For step by step instructions on how to get the most out of the wash package, read our Washing & Drying How-to Guide.
A good wax for OB paint is Poorboy's World Natty's Blue Paste Wax. Bang for the buck it's one of the best performing waxes out there. It adds a ton of depth and gloss to the paint and gives darker colors that wet look. Another good option would be Pete's '53 Wax or Pinnacle Souveran.
If you have any other questions on anything, please do not hesitate to ask.
Have a great weekend
George
A good wax for OB paint is Poorboy's World Natty's Blue Paste Wax. Bang for the buck it's one of the best performing waxes out there. It adds a ton of depth and gloss to the paint and gives darker colors that wet look. Another good option would be Pete's '53 Wax or Pinnacle Souveran.
If you have any other questions on anything, please do not hesitate to ask.
Have a great weekend
George
#708
Originally Posted by Da_ReD_G
ok we spoke before man you are a genius....
COLOR:LASER RED
I AM ABOUT TO MAKE A NICE PURCHASE ON YOUR WEBSITE MAN...
q's
1. i have light fine (THIN) swirls on direct sun light **MAJOR ON HOOD****
2. WHAT two polishes would i use **keep in mind ill be doing it by hand dont have money yet to get a orbital**
3. would i use a fine claybar????
4. how often do i soap and dry then how often do i full detail??
>>>>>>>>>>>>>>>>>>>>>>>>>>
I was going to purchase the pure carnauba wax but i just read one of your posts stating that pete 53 or cg5050..
also going to purchase sheepskin mit (ditching sponge) and a ultra-lit mit for those DIRTY parts.
COLOR:LASER RED
I AM ABOUT TO MAKE A NICE PURCHASE ON YOUR WEBSITE MAN...
q's
1. i have light fine (THIN) swirls on direct sun light **MAJOR ON HOOD****
2. WHAT two polishes would i use **keep in mind ill be doing it by hand dont have money yet to get a orbital**
3. would i use a fine claybar????
4. how often do i soap and dry then how often do i full detail??
>>>>>>>>>>>>>>>>>>>>>>>>>>
I was going to purchase the pure carnauba wax but i just read one of your posts stating that pete 53 or cg5050..
also going to purchase sheepskin mit (ditching sponge) and a ultra-lit mit for those DIRTY parts.
If you had to go with two polishes by hand, I'd opt for Poorboy's SSR 2.5 as your medium cut polish and follow up with Menzerna Final Polish II or better yet, PO106FF. Those would be the two polishes I'd use to remove swirls and imperfections by hand. Remember, to achieve results, you need to exert a good amount of pressure to break down the abrasive particles. It takes a while to get used to and a lot of time and effort, but if you're patient and have enough energy, you can remove some imperfections. In time, I'd recommend looking into investing in a quality buffer, which will not only improve results, but do it in less time with less energy.
Fine grade clay bar is recommended unless you have excessive contamination or paint over spray.
I'd recommend washing and drying at least every 2 weeks to minimize excessive contamination build up. Full details I recommend at least twice a year (usually Spring and Fall). Usually I'll do a mini-detail to reapply sealants on the off seasons. If you're opting for a wax, I'd recommend re-waxing once a month. The key is to make sure your car has protection year round. Sealants last anywhere from 3 - 6 months, where carnauba waxes are roughly 1 month. Any of the waxes you mentioned will look great on Laser Red. Keep us posted on how things turn out for you!
Originally Posted by jnmunsey
Anyone know of a good detailer in Houston? This will be for a new car coming up as well as my G...
Preferably would like someone to go to the dealership to do a new car detailing instead of having the dealer do it. Subsequent detailing can be done wherever(when i don't want to do it myself)
Thanks!
Preferably would like someone to go to the dealership to do a new car detailing instead of having the dealer do it. Subsequent detailing can be done wherever(when i don't want to do it myself)
Thanks!
Originally Posted by dreamcatchr
george, i'll be detailing my car soon... i have mezerna's IP and FIPP, but now ordered the power gloss compound to hopefully have more paint correction (IP on yellow wasnt strong enough so i need to step it up)... so my question is: does it matter which sealant i apply??? i considered getting zaino z-cs clear seal but i'd want to confirm that i will not have any issues bonding if i used mezerna's products to do the paint correction... also, could i top zaino z-cs with natty's blue (i have one that i havent used, so i thought perhaps i could use after allowing enough time for the sealant to cure)??? thanks in advance...
If you have any other questions, please do not hesitate to ask. Keep us posted on how things turn out for you.
Originally Posted by haywordvq35
thanks for everything and ill get back to you with some photos hopefully soon!!
George
#709
#710
Registered User
iTrader: (1)
Join Date: Aug 2007
Location: Sacramento, Ca
Posts: 1,242
Likes: 0
Received 0 Likes
on
0 Posts
George,
I just used Menz glaze for the first time. I followed up with Z2 sealant. White car just for reference.
I was hoping for a deeper look, still with the hard candy look of the Z2 that I have grown to really like. What I got was sort of a softer look...still as reflective, but still not deep and it lost the plastic look of the Z2.
Did I do something wrong? Am I just asking too much in keeping the Z2 look but trying to get it deeper by adding a glaze to the mix?
I just used Menz glaze for the first time. I followed up with Z2 sealant. White car just for reference.
I was hoping for a deeper look, still with the hard candy look of the Z2 that I have grown to really like. What I got was sort of a softer look...still as reflective, but still not deep and it lost the plastic look of the Z2.
Did I do something wrong? Am I just asking too much in keeping the Z2 look but trying to get it deeper by adding a glaze to the mix?
#711
#712
Originally Posted by Cnkboy
Hi George,
I hit some sort of platic airmatress or inflatable pool on the highway a few nights ago. From the high impact, some of the colouring has rubbed onto my clearbra. The clearbra is not damaged at all.
Any suggestions on how to remove this? Claybar perhaps?
I hit some sort of platic airmatress or inflatable pool on the highway a few nights ago. From the high impact, some of the colouring has rubbed onto my clearbra. The clearbra is not damaged at all.
Any suggestions on how to remove this? Claybar perhaps?
Originally Posted by TheIvoryG
George,
I just used Menz glaze for the first time. I followed up with Z2 sealant. White car just for reference.
I was hoping for a deeper look, still with the hard candy look of the Z2 that I have grown to really like. What I got was sort of a softer look...still as reflective, but still not deep and it lost the plastic look of the Z2.
Did I do something wrong? Am I just asking too much in keeping the Z2 look but trying to get it deeper by adding a glaze to the mix?
I just used Menz glaze for the first time. I followed up with Z2 sealant. White car just for reference.
I was hoping for a deeper look, still with the hard candy look of the Z2 that I have grown to really like. What I got was sort of a softer look...still as reflective, but still not deep and it lost the plastic look of the Z2.
Did I do something wrong? Am I just asking too much in keeping the Z2 look but trying to get it deeper by adding a glaze to the mix?
Originally Posted by loudog2
George,
I just picked up some jetseal 109 from you. On the bottle it says apply 2 coats. Should it be one right after another for a even layer, or 12 hours after the first one cures???
I just picked up some jetseal 109 from you. On the bottle it says apply 2 coats. Should it be one right after another for a even layer, or 12 hours after the first one cures???
Hope this helps.
George
#713
#714
Originally Posted by Taktix1
George, I am already a user of FMJ. Is there any wax that I can put on top of it that will look good done by hand? I haven't invested in a PC yet but probably will in the future, just not now. I have an IP for reference.
P21S Concours Carnauba Wax is a great choice for lighter colored vehicles. Another great option is Poorboy's Natty's Red Paste Wax. If you're looking for something more high end, one of the waxes I have coming in by the end of the month is specific for light pearl and metallic paint. I believe it goes for around $90, not 100% sure off the top of my head.
P21S is a popular option over FMJ, with proven results.
George
#715
Originally Posted by Detailed Image
Any wax should be applied via hand. The key benefit to owning a PC (or comparable buffer) is to polish away imperfections. I find that using a buffer to apply a wax simply wastes product and makes the removal of it harder.
P21S Concours Carnauba Wax is a great choice for lighter colored vehicles. Another great option is Poorboy's Natty's Red Paste Wax. If you're looking for something more high end, one of the waxes I have coming in by the end of the month is specific for light pearl and metallic paint. I believe it goes for around $90, not 100% sure off the top of my head.
P21S is a popular option over FMJ, with proven results.
George
P21S Concours Carnauba Wax is a great choice for lighter colored vehicles. Another great option is Poorboy's Natty's Red Paste Wax. If you're looking for something more high end, one of the waxes I have coming in by the end of the month is specific for light pearl and metallic paint. I believe it goes for around $90, not 100% sure off the top of my head.
P21S is a popular option over FMJ, with proven results.
George
#716
Originally Posted by Taktix1
thanks George. would i apply the wax the same way as I apply the FMJ?
George
#717
Originally Posted by Detailed Image
Yep, P21S comes with an applicator pad, Natty's does not. Thinner coats the better. I'd recommend removing the coat after every panel or so instead of applying it to the entire car then removing. If you're reapplying FMJ, for maximum results, let it cure for 24 hours before topping it with a wax.
George
George
#718
#719
#720
Originally Posted by Taktix1
Before I place my order, is P21S okay to use on my clear bra? I have Plexus already and usually just apply some plexus then FMJ on top of it.
George