Just kidding.

Ok for real. I got this idea from Eliot Ness over at autopia (Thanks). I thought it was a great way he thought about using the idea of applying wax to a applicator or machine pad like how you apply the deodorant to your underarm.

http://www.autopia.org/forum/detaili...stick-wax.html

So first I had to get a wax to try out with. This is where I got out my Collinite 476s. Then I had to get a used Deodorant stick container to pour in my wax. This is where I got my use old spice container.



So I had to clean it out with some APC and Dawn Direct foam





After it was clean. It was time to melt the wax. I left the wax in the original tin can and put it on the stovetop. Lite to a low flame. Didn't want it to boil. Just melt slowly.





Stir it little bit, to break down the wax a bit. Then got my Deodorant container and laid some rag underneath it. Got a funnel to help eazy the pouring and not to get any hot melted wax on myself.







After that I put the deodorant stick in the freezer with the container of the left over collinite



After 30 mins in the freezer. I took it out to check to see if it was hard as rock and it was. So this is what I got.





Well this is my little post. Can't wait to try it out to see how it works.

 

Wow...okay...you've got my interest. Have you tried applying? How does it work?

 

Just did it. Works the same was like if you took the wax out of the jar and apply to a machine pad. Also before you start turning the dial. Let it warm up a little bit or it will crack.

 

Very creative!

 

thanks