So what do you guys recommend for Polish and Finishing Polish for black color?

Thanks

 

Assuming you are using a random orbital buffer or rotary, Menzerna P203S followed by 3M Ultrafina.

 

if I plan on buying everything I need from washing to seal/waxing I am going to get the PC 7424, Its going to be 350 bucks to buy every little thing to get swirls gone and paint shining. So need to make sure I get the right polish

 

Ha I gave myself a budget($500) when I started detailing... I went overboard and spent 3x what I originally planned lol. Here's my advice: Go on DetailingBliss.com , it has very friendly, helpful people.

Product Recommendations:
PC 7424
Uber Flat pads, 5.5" or 4" (Detailersdomain.com)
Bilt-Hamber Auto Balm (http://www.carnaubawaxshop.co.uk/)
Bilt-Hamber Regular Clay
P203S (16 oz. size)
3M Ultrafina or PO85RD.
Folex for interior carpets (If needed)
303 Aerospace for interior dash and engine covers etc.
Leather Masters for your seats.
Uber Waffle Weave Drying Towel
The Uber No Name towel (the green and red one, so soft!)
and then just a couple more Microfibers and your set.

Ok, I know you have to get the BH Clay and Auto Balm imported from the UK, but man is this stuff nice. The clay is very nice and only needs water as lube and is cheap too, and the BH Auto Balm is a great wax/sealent and will fill in leftover swirls, and look amazing at the same time. It won't stain your trim like most waxes and can also be used on your windshield like Rain-X, only much better. Also, the great thing about Detailingbliss.com is that if you make a thread asking for samples of stuff you don't want to buy an entire jug of, a member will happily sell you a smaller size for dirt cheap.

Good Luck!