This 1 series came to us in pretty good shape. Not much polishing was needed however a thorough cleaning was necessary and proper prep on the paint and wheels were needed to apply Aquartz and Opti Coat - something the customer was keen on as this is a heavily used daily and also sees the track time.

What was done -
Exterior

- Wheels were prepped with Sonax Wheel Cleaner and cleaned up with various brushes
- Tires were spritzed down with Adam’s All Purpose Cleaner and washed down
- Wheel wells were cleaned up
- Pre Washed with W99
- Iron Cut
- Wash down and rinsed
- Door jambs were cleaned up
- Clayed
- Dried
- Tires dressed
- Masking
- Paint Measurement
-1 Step - Sonax Perfect Finish
- Inspection with Fenix, 3m Sun Gun, Infratech, and natural sunlight
- Last Step – Aquartz (3 coats)
- Wheels pulled off and treated with Opti Coat 2
- Brake Calipers cleaned and treated with Opti Coat 2
- Wheel wells were cleaned and dressed
- Rubber and Plastics Treated
- Exterior windows and mirrors cleaned and sealed
- Exhaust tips cleaned
- Windows were clayed, cleaned, and sealed
- Jambs steam cleaned

Links to products used -

1Z einszett W99
Iron Cut
Adam's All Purpose Cleaner
Sonax Full Effect Wheel Cleaner
Adam's Undercarriage Spray
Uber Clay Bar Kit
Sonax Perfect Finish
Aquartz Nano Coating
Optimum Opti Coat 2
Adam's Super VRT
Adam's Metal Polish
Adam's Glass Cleaner

Engine
Adam's All Purpose Cleaner
Adam's In and Out Spray

Interior
1Z einszett Cockpit
1Z einszett Leathercare

Tools used
Uber Wool Wash Mitt
Uber No Name MF Towels
Flex PE14-2-150
Uber Buffing Pads
Defelsko Paint Meter

Brinkmann
Kranzle Pressure Washer
Cam Spray Foam Canon
2 Grit Guard Buckets with Caddies
Uber Firehose Nozzle
Metro Air Force Blaster

Interior
Before





Metro Vac being used to clean up the interior






After




Exterior
Before



Wheels (this was 1 week of brake dust)
Before

 

Sonax Full Effect Wheel Cleaner to the rescue






(more on the wheels in a few)

Engine
Before





Adam's All Purpose sprayed generously on the engine bay



After
Engine was dressed with Adam's In and Out Spray




Bug and tar was evident on the nose of the car. I used the 1Z einszett Anti-Insekt Bug + Tar Remover




After




As you can see the Iron Cut was needed on this 1.









The 1 was washed with W99 and then rinsed well.



Clayed the windows and paint



I was still able to pull contaminants off the paint


Used 3m Adhesive remover to pull tar off the bottom of the car





As mentioned before the car didn't need much in terms of correction. We used Sonax Perfect Finish to prep the paint for Aquartz


On to the wheels, brake calipers and wheel wells


Steam used to clean the caliper/wheel wells etc






Opti Coat applied






Adam's Super VRT on the tires




After shots

 

You all do such a great job......

 

TSK TSK!! YOU USED THE FRIGGIN JACK TO SUPPORT THE CAR.

... and beautiful job on the detailing .

How does the opti-coat hold up to the heat of the calipers? Intruiging use of the product there.

 

Damn, very nice detailed write up. I really like how you show the products used. I still have to opti-coat my wheels, maybe I will do that tomorrow if I'm not too lazy.

 

Now that's a full detail...

 

always love seeing your posts.