[DFW] What have you done to your G Today?
#2042
Dude you hardly had those on for short period of time - I hope they have warranty? you didnt have them on for more than a yr and I know for a fact most manufacturers have at least a year for warranty.. how much for a replacement?
#2043
I thought so...but the noise has been back and when Rob and I pulled the rear driver-side coil off yesterday it appears that it is blown. Fluid was all over the piston.
I'm sorry, but that was mildly funny yesterday. YES, the fact that it happened sucks. The undertray was barely mounted under there to begin with from what I saw. It's no surprise that it ripped off.
But come on...you have to laugh just a little at this point
I'm sorry, but that was mildly funny yesterday. YES, the fact that it happened sucks. The undertray was barely mounted under there to begin with from what I saw. It's no surprise that it ripped off.
But come on...you have to laugh just a little at this point
so how many coils is that now for MDU?? I think thats 5 or 6 now...all converted to truecoilver setup right?
#2044
There is a prob wit the mdus n true coilover form. If u look a spring when its against the tophat it doesn't seat against it all the way around but will rest on the flange of the nut so that might cause some noise. Not sure, jake might b able to better explain but my thinkin is that the struts r bein worked to much in the oem form and are about blown when switched to true coil form. I'm curious to see somebodys that were put on in true coil form from the beginning
#2046
i wasnt referring to the noise..I was meaning blowing the coilovers....I personally dont think MDU coilovers can handle the true coilover setup over time.....there shocks are not built that way to handle it
#2047
#2048
Im going to keep my D2's and hope for the best on the stance...man this sux - Im all worried now..Trix is having issues with his rears...and I track my car. If these fail on me - Im getting K-sports next ....I was really considering the drift spec too.. I need to have a SOLID setup.. Guess only time will tell..
#2049
Im going to keep my D2's and hope for the best on the stance...man this sux - Im all worried now..Trix is having issues with his rears...and I track my car. If these fail on me - Im getting K-sports next ....I was really considering the drift spec too.. I need to have a SOLID setup.. Guess only time will tell..
#2050
Im going to keep my D2's and hope for the best on the stance...man this sux - Im all worried now..Trix is having issues with his rears...and I track my car. If these fail on me - Im getting K-sports next ....I was really considering the drift spec too.. I need to have a SOLID setup.. Guess only time will tell..
I will probably have my ARK Performance Coils on hopefully next week...they are a track setup so I can let you know how they perform....12k and 11k spring rates.
#2051
#2052
according to Stance, dampers are valved according to spring location. In the OEM location, the spring has a stiffer rate (10k I believe) and the strut is valved accordingly...which would be softer valving.
In true form, the spring rate is lower (7k) and the damper has stiffer valving. So if MDU has 5k in the rear, the damper should be valved fairly stiff either way. I would suggest MDU get on the ball about this. This is not driver/installer error by any part.
In true form, the spring rate is lower (7k) and the damper has stiffer valving. So if MDU has 5k in the rear, the damper should be valved fairly stiff either way. I would suggest MDU get on the ball about this. This is not driver/installer error by any part.