Hey fellas I just picked up a exhaust (topspeed pro1) and im going to pick up some jack stand and a jack, since it didn't come with instructions wondering what tools will i need to do this job.

I've done so me searches and there is not really a do it yourself found one but the guy didn't say what he used just that he was frustrated haha

So I got the next 2 days off so if something happens I got 2 days haha any help would be great since I dont wanna dish out the money to do this install since as I speak they are remodeling my house right now and was able to get funds just for the exhaust, thanks fellas

 

I installed my Injen exhaust and all it took was a ratchet, socket, and wrench. If I remember right it was 14mm? You will need a lot of WD-40 also to soak the nuts on the stock exhaust to get them off and to pull the mushroom tips out of the rubber hangers.
By far the hardest part was getting the stock exhaust off (probably what he was frustrated about). After that it was pretty quick and easy.

Good luck

 

Sweet thanks buju

 

You need some various socket sizes, PB blaster to loosen up those bolts, rachet, rachet extender( to get a little more leverage and torque), and something to get the rubber hangers off. I assume it's a pretty straight forward install.

 

Its easy. Just close your eyes, click your red sparkley shoes together 3 times and say there is no place like home. and whala


Oh wait mayb thats for something else

 

Thanks drew

Lol@ r1

 

Basic hand tools will do the trick.

If you dont have anything it might be a good time to pickup something basic like this..

http://www.sears.com/shc/s/p_10153_1...1&blockType=G1

 

Yeah most of my stuff stayed in Austin and I'm using some of the baics that my girl has , my birthday is coming up in April I know what I'm asking for lol thanks Dave

 

Not a problem :-)