G35man04 Different Exhaust Combinations with Sound clips
#1
G35man04 Different Exhaust Combinations with Sound clips
well I decided since alot of members go through what exhaust they like ....what they look like..price range...drone...etc. it brough me to this thread and just create one for the local member if anyone else has vids they want to post you can chime in..post it up etc and I will add it to the first post.
Im not putting them in any order by the way...just posting what I had before.
1. 350z Nismo Muffler with 5" Tips, HR y-pipe, stock coupe mid-pipe, Kinetix 300 Cell HFC's.
Price: $200-300 For Muffler, $75-100 for HR Y-Pipe
Drone: No
--------------------------------------------------------------------------
2. Fastintentions Carbon Fiber Catback
http://www.fastintentions.com/produc...roducts_id=105
Price: $1,529.00
Drone: Yes and paired with any aftermarket test pipe, or hfc you will have more.
Product Info:
•Components are constructed of T-304 stainless steel.
•2.5" stainless steel tubing.
•6"x14" round carbon fiber perforated core mufflers.
•4.5" resonated dual wall slash cut stainless steel tips.
Benefits over OEM.
•An increased average of 11 RWH & 9 FT LBS of torque over the stock cat back.
•Refining the stock note by increasing the depth and volume.
•NO RASP from RPM idle to RPM redline.
•The weight of this cat back is 51 LBS = 12 LBS lighter than stock.
--------------------------------------------------------------------------
3. Bassani Exhaust with strup headers and AAM HFC
http://www.bassani.com/part/350G5
Price: $930-1100
Drone: See comments below
it should be noted on the video with mine that it has strup headers and AAM HFC... *edit* and nismo r-tune cams!
I had NO drone/rasp before headers/cats
it was still ok after cats
It got a little raspy after headers
most rasp went away wen I did port/polish plenum and spacer
all rasp was gone when cams went in.
Product Info:
-2 1/4" dia. tube in, with resonators and "X" Crossover, dual 4x8 mufflers, 2 1/2" dia. out, 4" single wall dual slash cut polished stainless tips with billet inserts, stock location exit.
Mic was 5 feet away from the car, probably should have been a bit further, esp after cams.
beforecams.wma - 605kb
aftercams.wma - 649kb
--------------------------------------------------------------------------
4. HKS Exhaust
Price: $1200-1500
Drone: No
Product Info
- SUS304 full dual stainless steel piping
- Dual Titanium Tips
- 120 mm dual exhaust tips
- 60 mm exhaust piping
5. Motordyne Shockwave TDX v1
http://www.motordyneengineering.com/index.php?cPath=2_9
Price: $1,385.00
Drone: Yes
Product Info:
The True Dual X pipe exhaust system optimized for the highest level of torque and power. Dual 2.5" primary tubes and dual 3" midpipes provide the best overall power response.
--------------------------------------------------------------------------
6. Motordyne VQ Exhaust
Price: discountinued
Drone: No
--------------------------------------------------------------------------
7.ExoticSpeed R1-T
Price: $800
Drone: None
Product Info:
Muffler and midpipe included
SUS304 stainless steel
3'' piping
4" Titanium Tips
damn wind noise
--------------------------------------------------------------------------
8.Agency Power Ti Exhaust
Price: $650-750
Drone: Only under 2k
Product Info:
Muffler and midpipe included
Titanium muffler
T304 stainless steel midpipe
3'' piping
4.5" Titanium Tip
--------------------------------------------------------------------------
9. Injen SES True Dual
Member: Beerviper
Here is a video clip when I ran the 1/4 mile a while back, almost sounds like I am short shifting but that is just how the exhaust sounds!
--------------------------------------------------------------------------
10.Nismo Full Catback
Member: RiceRocketDave
--------------------------------------------------------------------------
11. Custom Exhaust
Member: ATOWERG35
Components:
(5) 45 degree l bends, (2) 30 degree bends, (1) u bend, (2) 4 foot straight sections, (1) x pipe, (2) 4" tips and (2) MagnaFlow Mufflers (3" outlet/inlet, 5" body, 14" case length, 20" overall length). All piping and bends were aluminized and mandrel bent, 2.5", minus the x pipe and bends from the mufflers to tips.
Thread with pics:
https://g35driver.com/forums/intake-...ust-build.html
Launch Videos are up guys!!! Let me know what y'all think/if you have any vid requests
Im not putting them in any order by the way...just posting what I had before.
1. 350z Nismo Muffler with 5" Tips, HR y-pipe, stock coupe mid-pipe, Kinetix 300 Cell HFC's.
Price: $200-300 For Muffler, $75-100 for HR Y-Pipe
Drone: No
--------------------------------------------------------------------------
2. Fastintentions Carbon Fiber Catback
http://www.fastintentions.com/produc...roducts_id=105
Price: $1,529.00
Drone: Yes and paired with any aftermarket test pipe, or hfc you will have more.
Product Info:
•Components are constructed of T-304 stainless steel.
•2.5" stainless steel tubing.
•6"x14" round carbon fiber perforated core mufflers.
•4.5" resonated dual wall slash cut stainless steel tips.
Benefits over OEM.
•An increased average of 11 RWH & 9 FT LBS of torque over the stock cat back.
•Refining the stock note by increasing the depth and volume.
•NO RASP from RPM idle to RPM redline.
•The weight of this cat back is 51 LBS = 12 LBS lighter than stock.
--------------------------------------------------------------------------
3. Bassani Exhaust with strup headers and AAM HFC
http://www.bassani.com/part/350G5
Price: $930-1100
Drone: See comments below
it should be noted on the video with mine that it has strup headers and AAM HFC... *edit* and nismo r-tune cams!
I had NO drone/rasp before headers/cats
it was still ok after cats
It got a little raspy after headers
most rasp went away wen I did port/polish plenum and spacer
all rasp was gone when cams went in.
Product Info:
-2 1/4" dia. tube in, with resonators and "X" Crossover, dual 4x8 mufflers, 2 1/2" dia. out, 4" single wall dual slash cut polished stainless tips with billet inserts, stock location exit.
Mic was 5 feet away from the car, probably should have been a bit further, esp after cams.
beforecams.wma - 605kb
aftercams.wma - 649kb
--------------------------------------------------------------------------
4. HKS Exhaust
Price: $1200-1500
Drone: No
Product Info
- SUS304 full dual stainless steel piping
- Dual Titanium Tips
- 120 mm dual exhaust tips
- 60 mm exhaust piping
Member Hound:
Mine - Kinetix 300 Cell Installed
Cruising/WOT
Member syshs AKA YASH
http://www.flickr.com/photos/syshs/3...7607144648540/
--------------------------------------------------------------------------Mine - Kinetix 300 Cell Installed
Cruising/WOT
Member syshs AKA YASH
http://www.flickr.com/photos/syshs/3...7607144648540/
5. Motordyne Shockwave TDX v1
http://www.motordyneengineering.com/index.php?cPath=2_9
Price: $1,385.00
Drone: Yes
Product Info:
The True Dual X pipe exhaust system optimized for the highest level of torque and power. Dual 2.5" primary tubes and dual 3" midpipes provide the best overall power response.
--------------------------------------------------------------------------
6. Motordyne VQ Exhaust
Price: discountinued
Drone: No
--------------------------------------------------------------------------
7.ExoticSpeed R1-T
Price: $800
Drone: None
Product Info:
Muffler and midpipe included
SUS304 stainless steel
3'' piping
4" Titanium Tips
damn wind noise
--------------------------------------------------------------------------
8.Agency Power Ti Exhaust
Price: $650-750
Drone: Only under 2k
Product Info:
Muffler and midpipe included
Titanium muffler
T304 stainless steel midpipe
3'' piping
4.5" Titanium Tip
--------------------------------------------------------------------------
9. Injen SES True Dual
Member: Beerviper
Here is a video clip when I ran the 1/4 mile a while back, almost sounds like I am short shifting but that is just how the exhaust sounds!
http://videos.streetfire.net/video/14-mile-run-at-ennis-tx-dragstrip-1345s_87796.htm
--------------------------------------------------------------------------
10.Nismo Full Catback
Member: RiceRocketDave
--------------------------------------------------------------------------
11. Custom Exhaust
Member: ATOWERG35
Components:
(5) 45 degree l bends, (2) 30 degree bends, (1) u bend, (2) 4 foot straight sections, (1) x pipe, (2) 4" tips and (2) MagnaFlow Mufflers (3" outlet/inlet, 5" body, 14" case length, 20" overall length). All piping and bends were aluminized and mandrel bent, 2.5", minus the x pipe and bends from the mufflers to tips.
Thread with pics:
https://g35driver.com/forums/intake-...ust-build.html
Launch Videos are up guys!!! Let me know what y'all think/if you have any vid requests
Last edited by g35man04; 12-07-2011 at 04:37 PM.
#2
it should be noted on the video with mine that it has strup headers and AAM HFC... *edit* and nismo r-tune cams!
I had NO drone/rasp before headers/cats
it was still ok after cats
It got a little raspy after headers
most rasp went away wen I did port/polish plenum and spacer
all rasp was gone when cams went in.
btw, good job.
I had NO drone/rasp before headers/cats
it was still ok after cats
It got a little raspy after headers
most rasp went away wen I did port/polish plenum and spacer
all rasp was gone when cams went in.
btw, good job.
Last edited by sexyrob; 02-16-2011 at 04:30 PM.
#3
it should be noted on the video with mine that it has strup headers and AAM HFC...
I had NO drone/rasp before headers/cats
it was still ok after cats
It got a little raspy after headers
most rasp went away wen I did port/polish plenum and spacer
all rasp was gone when cams went in.
btw, good job.
I had NO drone/rasp before headers/cats
it was still ok after cats
It got a little raspy after headers
most rasp went away wen I did port/polish plenum and spacer
all rasp was gone when cams went in.
btw, good job.
updated sir!! was waiting for your input on yours and knew you would!
#4
#5
I only know B&B exhaust from Domestics when I had my firebird.....unsure about it. Go check on youtube and see what you find. I know with buying a 350z exhaust you will have to pick up g35 exhaust extentions.
#6
#7
Trending Topics
#8
Crazy how many exhaust you have had chris. But now that i know you it doesnt surprise me. Lol Im still on my first exhaust considering theres not much for the sedan. I am thinking about selling my stillen and having something custom made up and do a lil fiberglass work to my bumper
#10
here is some more on my setup
the Mic was 5 feet away from the car, probably should have been a bit further, esp after cams.
beforecams.wma - 605kb
aftercams.wma - 649kb
the Mic was 5 feet away from the car, probably should have been a bit further, esp after cams.
beforecams.wma - 605kb
aftercams.wma - 649kb
#11
here is some more on my setup
the Mic was 5 feet away from the car, probably should have been a bit further, esp after cams.
beforecams.wma - 605kb
aftercams.wma - 649kb
the Mic was 5 feet away from the car, probably should have been a bit further, esp after cams.
beforecams.wma - 605kb
aftercams.wma - 649kb
#15