my car is getting a new motor and clutch and the dealer said that the pressure plate that i received from CZP is too small and my car wont shift nor drive.. has anyone heard of this...????
it is currently at riverside infiniti on the rack.. they told me they dropped the tranny twice already...

any suggestions.. i brought them the box the clutch and flywheels came in..

 

call and talk to CoZ at CZP.

 

i did... he thinks it may be installer issue... DEALER though... riverside infiniti homies...he said he needs a picture of the pressure plate to determine if i happened to get an
HR one... so i told riverside infiniti and they told me the car was still put together.. but not shifting.. so ... i think they are taking it apart... but they never called me back.. i am going to go there in the morning and try to figure it out.. i just hope they don't put my stock clutch back and send me on my way... cuz there having problems...

 

I think someone doesn't know what they are doing. I ordered that from COZ and it was as a set. I dont see how he would sell it wehre the clutch was right but the pressure plate wasnt.

 

i think the same thing... but.. the dealer has put these in before.. i spoke to COZ and he told me the same thing.. but there is a slight chance i couldv'e gotten a pressure plate from an HR... so.. i will try and resolve tomorrow...

 

OMG..!! found out the problem.. Just to let everyone know..

if you do the DIY clutch adjustment.. and get a new clutch later... you may need to back up the adjustment and make it stock height again..
the JWT clutch/flywheel combo is what i got..
i have read that after getting the clutch, people with stock clutch engagement,( that means never adjusting it), have a better clutch feel/and it engages at a lower point, unlike stock, where clutch engagement is really high....
so... since i did the adjustment before getting the clutch.. it already engaged at a lower point..
so when the new clutch went in.. the clutch pedal wasn't able to go all down due to the DIY adjustment i had done..
i went to the dealer today to find out why exactly was the problem and Tony at Riverside Infiniti told me the clutch wouldn't go all the way down.. i informed him that i did the DIY and that was the problem..
Tony AND the Tech both told me that Infiniti is never suppose to adjust the pedal.. if there is a problem with the pedal, they just replace the whole thing..
anyway.. after i told them, my car was fixed in 5min..
I hope this makes sense..!

sux ... they dropped my tranny 3x.... but now i have it back...
Thankx Tony....
RIVERSIDE INFINITI FTMFW....!!!!!
SUperiour service..!!

 

haha

good thing you solved it