Last night, my clutch was stuck to the floor and I couldn't get it in gear. When I got into gear, the pedal was still stuck and I had to kick it back out to change the gear.

Went to search for reasons for this issue, I found something about changing the clutch fluid. Here's the site https://g35driver.com/forums/drivetr...me-here-3.html


I did what it said and my clutch is still stuck on the floor. My car starts but will not go into gear! After I turn off the car, the gears work. I replaced my clutch 2 years ago at 95k. My clutch is at 128k right now. Could this be a master / slave cylinder or something else?
Does anyone have any idea or suggestion what could be wrong or help fix this problem? My funds are really tight...please help

 

slave cylinder...

 

Thanks for your help. I go check how much a slave cylinder cost tomorrow

I hope that my only problem.

 

Got the slave cylinder today. Still same problem.. I can not get the car in to gear. Can someone help me out?

 

This is order of diagnosis

Replace fluid with Dot 4
Bleed lines
Replace slave / bleed lines
Replace master / bleed lines
Replace Clutch line(only if bad)
Replace Pivot Ball
Replace Throw out bearing
Replace Flywheel
Replace Clutch
Replace Tranny
Replace CAR

http://my350z.com/forum/maintenance-...the-floor.html

Parts

https://g35driver.com/forums/g35-sed...arts-sale.html

https://g35driver.com/forums/engine-...-shipping.html

www.rockauto.com

 

Great post faiz23