I have a 2004 g35 manual and every time I step on the clutch I can hear a squeak and the engine dies the squeak kinda sounds like a throw out bearing but I don’t understand the engine stalling I was reading online and heard a lot about “crank walk” when your thrust bearings are bad causing your crankshaft to have play in it I read that can cause stalling when you push in the clutch so I recorded my crank pulley while I pushed the clutch to see if there was any movement I could not see any movement I will attach the video I made you can hear the squeak and my engine dying out as-well as the pulley I would just like some thoughts on what it could be

 

These engines don't have crank walk issues, some engines do, the VQ engines do not.

You probably have a bound up throwout bearing that's putting a lot of drag on the engine and stalling it, and creating a hellacious noise at the same time.

 

Thanks for the info you were correct took the clutch apart and throw out bearing was broken in half

 

Thrust bearing went booooooom! Thrust bearing walk!

 

Back in the early 2000s I had two friends with late 90 Eagle Talons and one friend with a 2000 Eclipse and my youngest brother had a early 90's Eclipse. All had the turbo 4G63, I know all about those thrust bearings LITERALLY FALLING OUT.