FS[SoCal]: G35 Complete Part Out - Cosworth, APS, Carbonetic, Stop Tech, Tein etc...
#1
G35 Complete Part Out - Cosworth, APS, Carbonetic, Stop Tech, Tein etc...
*SOME PICS ADDED*
***PRICE DROP!!!!!!
$10,000.00 for complete long block!!! Includes: Cosworth Built Short Block, Portflow Built Heads, Cosworth Cams, Carbonetic Triple Plate Clutch, ARP L19 Heads studs, RevUp oil pump, NISMO Thermostat, polished cam and timimg covers, etc....basically everything you need to drop this motor in your G or Z!!! Less than 7,000 miles!!
Hey Everyone,
I am sad to do this, but I am parting out my G35. My reasons are primarily financial and not because I cannot afford to keep the car, but mainly because there are other things I would like to do at this stage in my life.
Everything listed below is in impeccable condition, and for those who know me, know I take great care of my vehicle. Pics are available by request, and I will PM anybody pics if they want. Also if you are local to SoCal, everything listed below can been seen at Corner 3 Garage in Lake Forest which is where my car is currently being taken apart.
I would prefer local sales on everything due to the nature and size of some of the items; however, I am willing to ship. All shipping costs will be paid by BUYER. Now onto the goodies!!
1. Cosworth VQ35DE (low compression 8.8:1), Ported and Polished Heads, and Cosworth Cams ZK2 Grind – Basically a complete long block. The motor, heads, and cams have less than 7,000 miles on them…I would like to sell the complete long block as all one piece…asking price is $10,000.00
Cosworth VQ35DE Includes:
Includes the following:
• Cosworth Forged H-beam Connecting Rods
• Cosworth Forged Pistons and rings
• Cosworth Tri-metal bearings
• Balanced to within .5 gram
• Complete blue-print assembly
• Ring gap set
• Bearing clearance set
• Deck height set
• Connecting Rod side clearance set
• Crankshaft end float set
Heads include the following:
• Ported and polished by Port Flow
• Multi angle valve job by Port Flow
• +1 MM Supertech Oversized Valves (Inconnel Exhaust Valves and
Stainless Steel Intake Valves).
• Supertech Titanium retainers
• Supertech Dual Valve Springs
• Cosworth ZK2 270 degree cams
Other things included with the Long Block package:
• ARP L19 Head Studs
• Cosworth Head Gaskets
• NISMO Thermostat
• RevUP Oil Pump
This motor is complete and ready for your high horsepower build. As stated above, I would like to sell the motor as all one piece…asking price is $10,000.00
![Name: Picture021-1.jpg
Views: 2
Size: 31.6 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256709d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-picture021-1.jpg)
![Name: Cosworthengine-1.jpg
Views: 145
Size: 119.9 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256710d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-cosworthengine-1.jpg)
![Name: EnginePlate-1.jpg
Views: 128
Size: 101.1 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256711d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-engineplate-1.jpg)
![Name: IMG_2558-1.jpg
Views: 137
Size: 138.8 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256712d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-img_2558-1.jpg)
![Name: ViewofsideportsandCams-1.jpg
Views: 143
Size: 103.1 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256713d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-viewofsideportsandcams-1.jpg)
![Name: IMG_2543-1-1.jpg
Views: 135
Size: 36.2 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256714d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-img_2543-1-1.jpg)
2. Cosworth Polished Plenum: In great condition…asking price is SOLD!!!!
![Name: Picture019-1.jpg
Views: 2
Size: 129.3 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256715d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-picture019-1.jpg)
3. APS Extreme Twin Turbo System w/ APS Extreme Fuel System: Kit has less than 7,000 miles and comes with the GOOD Garrett BB Turbo’s…comes with everything needed to bolt right up… *SOLD!!!*
4. APS 3” True Dual Race Exhaust: Great condition… *SOLD!!!!*
5. Carbonetic Triple Plate Carbon Clutch: Less than 7,000 miles on this clutch, and it drives phenomenal! Very smooth…asking price is [U]SOLD!!!!U]
![Name: Picture007-2.jpg
Views: 2
Size: 86.7 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256716d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-picture007-2.jpg)
6. StopTech Front and Rear BBK (6 pot fronts and 4 pot rears w/ slotted rotors): These breaks are basically brand new with less than 3,000 miles on them. Kit will come with everything to bolt right up…asking price is $3,500.00 O.B.O. **SOLD!!!!!!!!**
All of this stuff needs to move, and if you are seriously interested I will work something out. Below is a link to my build thread completely detailed from start to finish with pictures:
My Build Thread: https://g35driver.com/forums/forced-...-pics-56k.html
This is pretty much it for the big stuff….I also have other misc items I will be creating separate threads for as parts start to come off. This includes (Custom Oil Cooler, Varrosten Wheels, NISMO CF Shift ****, Ings+1 Front Fenders, Stock hood, Stock Trunk, OEM Double Din Kit with A/C controls etc…)
PM me with any pic requests and let me know if you have any questions! Or if you are local to SoCal stop by Corner 3 Garage in Lake Forest to see it for yourself.
Thanks,
Mike
***PRICE DROP!!!!!!
$10,000.00 for complete long block!!! Includes: Cosworth Built Short Block, Portflow Built Heads, Cosworth Cams, Carbonetic Triple Plate Clutch, ARP L19 Heads studs, RevUp oil pump, NISMO Thermostat, polished cam and timimg covers, etc....basically everything you need to drop this motor in your G or Z!!! Less than 7,000 miles!!
Hey Everyone,
I am sad to do this, but I am parting out my G35. My reasons are primarily financial and not because I cannot afford to keep the car, but mainly because there are other things I would like to do at this stage in my life.
Everything listed below is in impeccable condition, and for those who know me, know I take great care of my vehicle. Pics are available by request, and I will PM anybody pics if they want. Also if you are local to SoCal, everything listed below can been seen at Corner 3 Garage in Lake Forest which is where my car is currently being taken apart.
I would prefer local sales on everything due to the nature and size of some of the items; however, I am willing to ship. All shipping costs will be paid by BUYER. Now onto the goodies!!
1. Cosworth VQ35DE (low compression 8.8:1), Ported and Polished Heads, and Cosworth Cams ZK2 Grind – Basically a complete long block. The motor, heads, and cams have less than 7,000 miles on them…I would like to sell the complete long block as all one piece…asking price is $10,000.00
Cosworth VQ35DE Includes:
Includes the following:
• Cosworth Forged H-beam Connecting Rods
• Cosworth Forged Pistons and rings
• Cosworth Tri-metal bearings
• Balanced to within .5 gram
• Complete blue-print assembly
• Ring gap set
• Bearing clearance set
• Deck height set
• Connecting Rod side clearance set
• Crankshaft end float set
Heads include the following:
• Ported and polished by Port Flow
• Multi angle valve job by Port Flow
• +1 MM Supertech Oversized Valves (Inconnel Exhaust Valves and
Stainless Steel Intake Valves).
• Supertech Titanium retainers
• Supertech Dual Valve Springs
• Cosworth ZK2 270 degree cams
Other things included with the Long Block package:
• ARP L19 Head Studs
• Cosworth Head Gaskets
• NISMO Thermostat
• RevUP Oil Pump
This motor is complete and ready for your high horsepower build. As stated above, I would like to sell the motor as all one piece…asking price is $10,000.00
![Name: Picture021-1.jpg
Views: 2
Size: 31.6 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256709d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-picture021-1.jpg)
![Name: Cosworthengine-1.jpg
Views: 145
Size: 119.9 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256710d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-cosworthengine-1.jpg)
![Name: EnginePlate-1.jpg
Views: 128
Size: 101.1 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256711d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-engineplate-1.jpg)
![Name: IMG_2558-1.jpg
Views: 137
Size: 138.8 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256712d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-img_2558-1.jpg)
![Name: ViewofsideportsandCams-1.jpg
Views: 143
Size: 103.1 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256713d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-viewofsideportsandcams-1.jpg)
![Name: IMG_2543-1-1.jpg
Views: 135
Size: 36.2 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256714d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-img_2543-1-1.jpg)
2. Cosworth Polished Plenum: In great condition…asking price is SOLD!!!!
![Name: Picture019-1.jpg
Views: 2
Size: 129.3 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256715d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-picture019-1.jpg)
3. APS Extreme Twin Turbo System w/ APS Extreme Fuel System: Kit has less than 7,000 miles and comes with the GOOD Garrett BB Turbo’s…comes with everything needed to bolt right up… *SOLD!!!*
4. APS 3” True Dual Race Exhaust: Great condition… *SOLD!!!!*
5. Carbonetic Triple Plate Carbon Clutch: Less than 7,000 miles on this clutch, and it drives phenomenal! Very smooth…asking price is [U]SOLD!!!!U]
![Name: Picture007-2.jpg
Views: 2
Size: 86.7 KB](https://g35driver.com/forums/attachments/engine-complete-motors/256716d1502131791-g35-complete-part-out-cosworth-aps-carbonetic-stop-tech-tein-etc-picture007-2.jpg)
6. StopTech Front and Rear BBK (6 pot fronts and 4 pot rears w/ slotted rotors): These breaks are basically brand new with less than 3,000 miles on them. Kit will come with everything to bolt right up…asking price is $3,500.00 O.B.O. **SOLD!!!!!!!!**
All of this stuff needs to move, and if you are seriously interested I will work something out. Below is a link to my build thread completely detailed from start to finish with pictures:
My Build Thread: https://g35driver.com/forums/forced-...-pics-56k.html
This is pretty much it for the big stuff….I also have other misc items I will be creating separate threads for as parts start to come off. This includes (Custom Oil Cooler, Varrosten Wheels, NISMO CF Shift ****, Ings+1 Front Fenders, Stock hood, Stock Trunk, OEM Double Din Kit with A/C controls etc…)
PM me with any pic requests and let me know if you have any questions! Or if you are local to SoCal stop by Corner 3 Garage in Lake Forest to see it for yourself.
Thanks,
Mike
Last edited by silver g; 10-29-2011 at 05:16 PM.
#2
#3
#4
#6
Thanks Levon!
#7
Trending Topics
#8
#10
![Bowrofl](https://g35driver.com/forums/images/smilies/bowrofl.gif)
Seriously, if you know anyone that may want some of this stuff let me know Dustin. I will work with them...I need to move everything as soon as possible.
#12
#14
PM replied on the Tein's...
Varrosten's are 19X9.5 +12 in the front and 19X10.5 +12 in the rear. One wheel is damaged (prob not fixable) and the two rears and one front are like new (no scratches, nicks, etc...) I am only comfortable selling the three wheels...I wont sell bad conditioned items. Let me know if you want them.
Varrosten's are 19X9.5 +12 in the front and 19X10.5 +12 in the rear. One wheel is damaged (prob not fixable) and the two rears and one front are like new (no scratches, nicks, etc...) I am only comfortable selling the three wheels...I wont sell bad conditioned items. Let me know if you want them.