Opinons - will I run lean with a plenum spacer and a FI exhaust?
Joined: Aug 2003
Posts: 660
Likes: 12
From: Ontario, Canada
Opinons - will I run lean with a plenum spacer and a FI exhaust?
Hi guys - was looking to get your opinons. I am wondering if you think I will run lean with just a plenum spacer and a FI exhaust. I am plannning on ordering an OSIRIS but was wondering if anyone did an A/F dyno with this setup. Thanks guys,
Guest
Posts: n/a
If you're not FI it won't be too big a deal. You won't be lean enough at redline to hurt anything. That's how you gain some power with NA mods. A little leaner - plus freeing up some flow. The computer will adjust some to compensate if it runs too lean.
The only thing you may want to keep a look out for is pinging/knocking. You could do a dyno run with a wideband if you felt like it, I would think you'd still be in the 12's A/F ratio for now... which is fine.
The only thing you may want to keep a look out for is pinging/knocking. You could do a dyno run with a wideband if you felt like it, I would think you'd still be in the 12's A/F ratio for now... which is fine.
Joined: Aug 2003
Posts: 660
Likes: 12
From: Ontario, Canada
Thanks guys - in terms of pinging/knocking - what does it sound like in this car? I had an old corolla that would knock pretty bad but I thought since most newer cars have knock sensors that you wouldn't notice it?
Thread
Thread Starter
Forum
Replies
Last Post
Daniel k.
New Members Check In
13
Nov 3, 2015 09:52 AM





