Here is the situation….

I’m trying to clean the MAF with some CRC and so far I have been able to remove the MAF unit from the tube however I can’t seem to remove the wiring harness from the MAF. I’ve trying to find and push in the release switch but with no luck.

Any advice or suggestions would be helpful…..or any alternatives such as unplugging the battery to kill the current....I’m at a loss at this point....arrrrrrgghhhh!!!!!

Thanks for the help!!!

 

push the button harder, and push the clip in toward the maff before pulling out.

hope i helped

 

Finally got it!!!!!!!!!!!!!!!

Thanks, I was scared I was going to break it but it just took a lot of force…..time to clean!