Custom G35C Engine Grounding/Earthing Kit
Dyno Charts
Search for Grounding Kits and/or Dyno Charts on my350z.com. There are several posts where people have had there cars dyno'd with and without the grounding kit.
The performance increase is in accordance with the charts from the Import Tuner article. Basically just a couple of hp. The main selling factor for the grounding kit is its ability to smooth out the idle and acceleration. All the kit is doing is cleaning up the signal to the ECU, allowing it to perform more efficiently.
The performance increase is in accordance with the charts from the Import Tuner article. Basically just a couple of hp. The main selling factor for the grounding kit is its ability to smooth out the idle and acceleration. All the kit is doing is cleaning up the signal to the ECU, allowing it to perform more efficiently.
Re: Custom G35C Engine Grounding/Earthing Kit
Holy [censored]! Those dyno charts show a massive difference in the Max and RX7 engines. I'm curious as to what it does for ours?
03.5 6spd DG/G aero pk/kit
He who makes a beast of himself gets rid of the pain of being a man.
03.5 6spd DG/G aero pk/kit
He who makes a beast of himself gets rid of the pain of being a man.
Re: Custom G35C Engine Grounding/Earthing Kit
The 5- wire kit has shown to have dramatic effects on smoothness and some nice changes in engine response. The extra 2 wires are more subtle in effect, benefiting automatic tranny response somewhat. I suspect the more mods to your car, the more noticeable the benefits might be. Best bang for the buck is the 5, but most with auto trannies do the full 7 and are pleased with the overall results.
For a quick read:
Hyper-Ground FAQ Thread
<font color=green>GG</font color=green>
For a quick read:
Hyper-Ground FAQ Thread
<font color=green>GG</font color=green>
InSaNeAmine – Freebee give-aways
InSaNeAmine – Freebee give-aways
I have a few give-aways for you guys/gals if you want them:
1. Up for grabs is a brand spanking new 5 wire light purple grounding kit that has been sitting on my floor for several months and I want it to leave. It was the last of the roll.
2. Next; a 6 wire SOLID RED grounding kit (used by me). I decided to go back to the clear red “candy cane” look.
3. Last but, not least – since I did the Borla give-away last year for the folks who helped me get started at my350z; I wanted to offer something else up to everyone.
Any and all purchases from the beginning of the year until 6/30/04 will be entered into a drawing to receive their choice of CAIs – Injen or AEM!!!
Thanks for another wonderful year – I love you guys/gals, thank you, thank you, thank you!
THE FIRST EMAILS CLAIM THE GK’S:
InSaNeAmine@***.net
I have a few give-aways for you guys/gals if you want them:
1. Up for grabs is a brand spanking new 5 wire light purple grounding kit that has been sitting on my floor for several months and I want it to leave. It was the last of the roll.
2. Next; a 6 wire SOLID RED grounding kit (used by me). I decided to go back to the clear red “candy cane” look.
3. Last but, not least – since I did the Borla give-away last year for the folks who helped me get started at my350z; I wanted to offer something else up to everyone.
Any and all purchases from the beginning of the year until 6/30/04 will be entered into a drawing to receive their choice of CAIs – Injen or AEM!!!
Thanks for another wonderful year – I love you guys/gals, thank you, thank you, thank you!
THE FIRST EMAILS CLAIM THE GK’S:
InSaNeAmine@***.net
Re: Gone
to make a 7 wire system is it just 2 wires added in 2 other locations? or is the entire setup different
04 6MTc / TB / Willow / Premium / clear corners / Z-tube / K&N Filter / Tein S-tech / Borla TDE / 35% tint / Grounding kit / Stillen SC / Spoiler depot wing / TS ECU / Crawford Plenum / RH Pro J5 20"
04 6MTc / TB / Willow / Premium / clear corners / Z-tube / K&N Filter / Tein S-tech / Borla TDE / 35% tint / Grounding kit / Stillen SC / Spoiler depot wing / TS ECU / Crawford Plenum / RH Pro J5 20"
Re: Gone
The 7 wire setup is just an addition of 2 wires.
One goes from the front of the engine to the body panel on driver's side (wire #6)
Wire #7 goes from the back of the plenum down to the gear box (for AT models only).
Since mine is a 6MT, I have only 6 wires.
Here is my setup...

04 6MTC DG/G/Prm/NAV/C.Crnrs/C.Br/A.ped/Polk/PIAA/Grnd.Kit/Rebadged/JWT Pop Charger/Z-Tube/Spl.Grds
One goes from the front of the engine to the body panel on driver's side (wire #6)
Wire #7 goes from the back of the plenum down to the gear box (for AT models only).
Since mine is a 6MT, I have only 6 wires.
Here is my setup...

04 6MTC DG/G/Prm/NAV/C.Crnrs/C.Br/A.ped/Polk/PIAA/Grnd.Kit/Rebadged/JWT Pop Charger/Z-Tube/Spl.Grds
Colors, colors, colors!!!
A rainbow:

From TDC clockwise:
Orange,
Silver,
Matte silver,
Smoked,
Solid black,
Red,
Solid red,
Solid yellow,
Light purple,
Dark purple,
Light blue (Caribbean),
Medium blue (Daytona),
Dark blue (Twilight)


From TDC clockwise:
Orange,
Silver,
Matte silver,
Smoked,
Solid black,
Red,
Solid red,
Solid yellow,
Light purple,
Dark purple,
Light blue (Caribbean),
Medium blue (Daytona),
Dark blue (Twilight)

Give away
Hey everyone!
I just wanted to thank everybody for their interest on the grounding kits and to remind you all that you have less than a month to get in on the CAI giveaway.
As always, I am grateful for your business and appreciative of your support!
I just wanted to thank everybody for their interest on the grounding kits and to remind you all that you have less than a month to get in on the CAI giveaway.
As always, I am grateful for your business and appreciative of your support!
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Midwestern
0
Jul 22, 2015 10:27 AM





