Hope for an 11 second G?
NY G-Squad G Race Driver
Joined: Aug 2003
Posts: 4,172
Likes: 1
From: NYC
Re: Hope for an 11 second G?
I rather have a huge front mount than 2 small ones lol... But you get to keep stock bumper, that's a plus! Good for the ultimate sleeper but I rather have my Front mount hangin out lol...
Martin
2003.5 BS G35
Nismo Aero/Sport Package
Injen CAI
B+G Springs
ADR M-Classic 19's..
Martin
2003.5 BS G35
Nismo Aero/Sport Package
Injen CAI
B+G Springs
ADR M-Classic 19's..
Guest
Posts: n/a
Re: Hope for an 11 second G?
There is a stock engine Z running Greddy twin turbos putting out 453 rwhp on the Z board. Whats really sad is that there are people running 11's on MKIV Supras with only 4 mods and less than $1500 in parts: downpipe, exhaust, BCC and boost controller.
04' G35 Coupe 6-sp
Diamond Graphite/Willow w/Premium
04' G35 Coupe 6-sp
Diamond Graphite/Willow w/Premium
NY G-Squad G Race Driver
Joined: Aug 2003
Posts: 4,172
Likes: 1
From: NYC
Re: Hope for an 11 second G?
Loren that's sick, how can you get that out of Greddy TT's? I havent seen higher than 400 out of a stock engine hmm... Also it is pretty sad what you can do with those supras, makes me pissed..
Martin
2003.5 BS G35
Nismo Aero/Sport Package
Injen CAI
B+G Springs
ADR M-Classic 19's..
Martin
2003.5 BS G35
Nismo Aero/Sport Package
Injen CAI
B+G Springs
ADR M-Classic 19's..
Re: Hope for an 11 second G?
Hey Guys
That Z with 450hp was at 10.5 psi of boost i believe. Good numbers, but oyu don't want to daily drive at that setting.
Also, some corrections on PE. Even though my dyno numbers will be coming out soon, here are the numbers obtained from Cheston's PE kit:
40x wheel hp was achieved in the following two configurations (this is on Bosch dyno however):
1) Bone stock exhaust (with stock cats) + PE TT at 8.5 psi
and
2) Straight through exhaust (with test pipes) + PE TT at 7.0-7.3 psi
That Z with 450hp was at 10.5 psi of boost i believe. Good numbers, but oyu don't want to daily drive at that setting.
Also, some corrections on PE. Even though my dyno numbers will be coming out soon, here are the numbers obtained from Cheston's PE kit:
40x wheel hp was achieved in the following two configurations (this is on Bosch dyno however):
1) Bone stock exhaust (with stock cats) + PE TT at 8.5 psi
and
2) Straight through exhaust (with test pipes) + PE TT at 7.0-7.3 psi
NY G-Squad G Race Driver
Joined: Aug 2003
Posts: 4,172
Likes: 1
From: NYC
Re: Hope for an 11 second G?
Wow gurgen, it seems like the straight through exhaust and test pipe's take off a bar of boost and more!! That means theres always room to go up which can get some crazy numbers, this kit looks so well built!!
Martin
2003.5 BS G35
Nismo Aero/Sport Package
Injen CAI
B+G Springs
ADR M-Classic 19's..
Martin
2003.5 BS G35
Nismo Aero/Sport Package
Injen CAI
B+G Springs
ADR M-Classic 19's..
Registered User
Joined: Dec 2003
Posts: 126
Likes: 0
From: San Diego, CA
Re: Hope for an 11 second G?
i'd say tom (whiteg35c) could run 11's given the right rear wheel/tire setup for drag racing. getting traction and a good launch on a 500+rwhp street car can be a pain.
-phil
*** 2003 G35s 5at / Pearl White ***
*** Volk Racing / Falken / Tein / Hotchkis Tuning / Nismo / Blitz / Hks / Greddy / Xerd / Unorthodox Racing / Samco / Sparco / Alpine / Mb Quart / Sony ***
-phil
*** 2003 G35s 5at / Pearl White ***
*** Volk Racing / Falken / Tein / Hotchkis Tuning / Nismo / Blitz / Hks / Greddy / Xerd / Unorthodox Racing / Samco / Sparco / Alpine / Mb Quart / Sony ***
Thread
Thread Starter
Forum
Replies
Last Post