i need stainless steel braided hoses for my ARC catch can but im not sure on the sizes and lengths.

i want it to be just like Marcus's car.

http://www.anplumbing.com/shop/index...dept=Auto-Flex

or

http://www.holley.com/types/Auto-Flex%20Hose.asp







any help would be greatly appreciated

Thanks,
-Wes

 

i just realized i spelled stainless wrong lol

mods can you please correct?

Thanks

 

Why don't you just PM Marcus?

 

i did PM John (speedraver) and him are not sure since zack did it for them

zack was going to PM me the sizes but i never got a PM back :/

 

Sorry, taking off my catch can is a hassle, and it's been too cold and dark after work for me to want to do it. I looked at the hoses this morning and they look like -10 and -8. Your best bet is to measure the diameter of the fittings and call up the shop, he'll tell you the right hose diameter size. For the lengths, get some cheap rubber hose from the auto parts store and mock it up... measure, and buy the same lengths in braided hose. This is exactly how I did it on my car.

Unfortunately I can't give you the lengths because it can vary depending on intake pipe, catch can location and routing of the hose.

Good luck-

 

Thanks

 

earl hoses? as it does vary sizes...i forgot someone posted a thread asking for the sizes but sorry i can not be help of the sizes and lengths

 

I found this pm I had sent Marcus from way back... not sure if it's right, or if it applies to your setup - but it might be a start.

"You'll need 10ft of -12, and 2ft of -8 hose. The fittings I use are Earl's, and you'll need 3 of the -12 and 2 of the -8 fittings. You only need 3 of the large fittings because you can't see one of the ends... but you can get 4 if you want."

 

thank you sir

 

holy crap, 10' of -12. that will feed a family in africa for 3 months!