DIY VQ35HR/VQ37VHR thermostat replacement on VQ35DE
#1
DIY VQ35HR/VQ37VHR thermostat replacement on VQ35DE
The coolant caps I am using to bypass coolant are finally starting to show their age... about 4 months. It's no longer safe to run the car with them for much longer so I started today with replacing the thermostat.
Procedure took less than 15min total. I didn't even have to bleed the air out. Just topped it off and used my left hand palm to push on the radiator inlet and squeeze the bottom radiator hose and that pushed the air bubbles out into the overflow tank.
Procedure took less than 15min total. I didn't even have to bleed the air out. Just topped it off and used my left hand palm to push on the radiator inlet and squeeze the bottom radiator hose and that pushed the air bubbles out into the overflow tank.
Thread
Thread Starter
Forum
Replies
Last Post
yassy
G35 Sedan V35 2003-06
3
08-09-2015 07:31 PM
bleeding, changing, coolant, diy, g35, housing, location, replace, replacement, termalstat, thermostat, vg35de, vq35, vq35de, vq35hr